Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

General Description The MAX4533 quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333 and MAX333A. The MAX4533 features fault-protected inputs and Rail-to-Rail® signal handling. The normally open (NO_ ) and normally closed (NC_ )

文件：172.42 Kbytes 页数：12 Pages

Maxim

美信

四路、满摆幅、故障保护、SPDT模拟开关

MAX4533四通道、单刀双掷(SPDT)、故障保护模拟开关与行业标准MAX333和MAX333A引脚兼容。MAX4533为输入提供故障保护并具有轨到轨信号处理能力。常开(NO_)和常闭(NC_)端子受到过压故障保护，通电时高达±25V，断电时高达±40V。在故障条件下，NO_和NC_变为高阻抗，只有几纳安的漏电流流向电源。此外，输出(COM_)箝位至适当极性的供电轨并提供高达±10mA的负载电流。这可以确保发生故障时提供明确的轨到轨输出。\n\n MAX4533采用±4.5V至±18V双电源或+9V至+36V单电源供电。所有数字输入的逻辑阈值为+0.8V和+2.4V，确保采用±15 • 轨到轨信号处理\n\n• 断电时提供±40V故障保护\n\n• 使用±15V电源时提供±25V故障保护\n\n• 电源关闭时所有开关断开\n\n• 上电或关断期间无需电源排序\n\n• 在故障条件下，输出箝位至适当的电源电压——无转换毛刺\n\n• 过压期间的输出箝位电阻为1kΩ（典型值）\n\n• 175Ω（最大值）信号路径，采用±15V电源\n\n• 20ns（典型值）故障响应时间\n\n• ±4.5V至±18V双电源供电\n\n• +9V至+36V单电源\n\n• 与行业标准MAX333/MAX333A引脚兼容\n\n• TTL/CMOS兼容逻辑输入，采用±15V或+9V至+15V单;

ADI

亚德诺

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

General Description The MAX4533 quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333 and MAX333A. The MAX4533 features fault-protected inputs and Rail-to-Rail® signal handling. The normally open (NO_ ) and normally closed (NC_ )

文件：172.42 Kbytes 页数：12 Pages

Maxim

美信

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

General Description The MAX4533 quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333 and MAX333A. The MAX4533 features fault-protected inputs and Rail-to-Rail® signal handling. The normally open (NO_ ) and normally closed (NC_ )

文件：172.42 Kbytes 页数：12 Pages

Maxim

美信

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

General Description The MAX4533 quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333 and MAX333A. The MAX4533 features fault-protected inputs and Rail-to-Rail® signal handling. The normally open (NO_ ) and normally closed (NC_ )

文件：172.42 Kbytes 页数：12 Pages

Maxim

美信

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

General Description The MAX4533 quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333 and MAX333A. The MAX4533 features fault-protected inputs and Rail-to-Rail® signal handling. The normally open (NO_ ) and normally closed (NC_ )

文件：172.42 Kbytes 页数：12 Pages

Maxim

美信

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

General Description The MAX4533 quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333 and MAX333A. The MAX4533 features fault-protected inputs and Rail-to-Rail® signal handling. The normally open (NO_ ) and normally closed (NC_ )

文件：172.42 Kbytes 页数：12 Pages

Maxim

美信

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

General Description The MAX4533 quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333 and MAX333A. The MAX4533 features fault-protected inputs and Rail-to-Rail® signal handling. The normally open (NO_ ) and normally closed (NC_ )

文件：172.42 Kbytes 页数：12 Pages

Maxim

美信

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

General Description The MAX4533 quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333 and MAX333A. The MAX4533 features fault-protected inputs and Rail-to-Rail® signal handling. The normally open (NO_ ) and normally closed (NC_ )

文件：172.42 Kbytes 页数：12 Pages

Maxim

美信