Single/Dual/Quad, Low-Power, Single-Supply, Rail-to-Rail I/O Op Amps with Shutdown

General Description The MAX4330–MAX4334 single/dual/quad op amps combine a wide 3MHz bandwidth, low-power operation, and excellent DC accuracy with Rail-to-Rail inputs and outputs. These devices require only 245µA per amplifier, and operate from either a single +2.3V to +6.5V supply or dual ±1.1

文件：176.52 Kbytes 页数：16 Pages

Maxim

美信

单/双/四路、低功耗、单电源、满摆幅输入/输出运算放大器，带有关断

MAX4330–MAX4334单通道/双通道/四通道运算放大器不仅具有3MHz宽带宽和出色的直流精度，还提供轨到轨输入和输出，支持低功耗工作。这些器件中每个放大器仅需要245µA电流，并采用+2.3V至+6.5V单电源或±1.15V至±3.25V双电源供电。输入共模电压范围扩展至VEE和VCC以上250mV，输出摆幅为轨到轨。MAX4331/MAX4333具有关断模式，在该模式下，输出变为高阻抗，每个放大器的电源电流降至9µA。\n\n 这些放大器不仅支持低功耗工作，还提供轨到轨输入共模范围和输出摆幅，非常适合便携式/电池供电设备和其他低压单电源应用。尽管额定的最低工作电压为2.3V • 增益带宽积：3MHz\n\n• 每个放大器的静态电流：245µA\n\n• 采用节省空间的SOT23-5封装(MAX4330)\n\n• +2.3V至+6.5V单电源供电\n\n• 轨到轨输入共模电压范围\n\n• 轨到轨输出电压摆幅\n\n• 失调电压：250µV\n\n• 低功耗、9µA（每个放大器）关断模式(MAX4331/MAX4333)\n\n• 过驱输入无反相\n\n• 能够驱动2kΩ负载\n\n• 单位增益稳定;

ADI

亚德诺

Single/Dual/Quad, Low-Power, Single-Supply, Rail-to-Rail I/O Op Amps with Shutdown

General Description The MAX4330–MAX4334 single/dual/quad op amps combine a wide 3MHz bandwidth, low-power operation, and excellent DC accuracy with Rail-to-Rail inputs and outputs. These devices require only 245µA per amplifier, and operate from either a single +2.3V to +6.5V supply or dual ±1.1

文件：176.52 Kbytes 页数：16 Pages

Maxim

美信

Single/Dual/Quad, Low-Power, Single-Supply, Rail-to-Rail I/O Op Amps with Shutdown

General Description The MAX4330–MAX4334 single/dual/quad op amps combine a wide 3MHz bandwidth, low-power operation, and excellent DC accuracy with Rail-to-Rail inputs and outputs. These devices require only 245µA per amplifier, and operate from either a single +2.3V to +6.5V supply or dual ±1.1

文件：176.52 Kbytes 页数：16 Pages

Maxim

美信