740MHz, Low-Noise, Low-Distortion Op Amps in SOT23-5

General Description The MAX4104/MAX4105/MAX4304/MAX4305 op amps feature ultra-high speed, low noise, and low distortion in a SOT23 package. The unity-gain-stable MAX4104 requires only 20mA of supply current while delivering 625MHz bandwidth and 400V/µs slew rate. The MAX4304, compensated for gain

文件：132.29 Kbytes 页数：12 Pages

MAXIM

美信

740MHz、低噪声、低失真运算放大器，SOT23-5封装

MAX4104/MAX4105/MAX4304/MAX4305运算放大器具有超高速、低噪声和低失真特性，采用SOT23封装。单位增益稳定的MAX4104仅需要20mA的电源电流，同时提供625MHz带宽和400V/µs压摆率。MAX4304针对+2V/V或更高增益进行了补偿，提供730MHz带宽和1000V/µs压摆率。MAX4105针对+5V/V的最小增益进行了补偿，提供410MHz带宽和1400V/µs压摆率。MAX4305具有+10V/V最小增益补偿，提供340MHz带宽和1400V/µs压摆率。\n\n 这些器件具有2.1nV/√Hz的低电压噪声密度和-88dBc的无杂散动态 • 低电压噪声密度：2.1nV/√Hz\n\n• 超高-3dB带宽：740MHz（MAX4304，AVCL = 2V/V）\n\n• 0.1dB增益平坦度：100MHz (MAX4104/4105)\n\n• 1400V/µs压摆率(MAX4105/4305)\n\n• -88dBc SFDR（5MHz，RL = 100Ω）(MAX4104/4304)\n\n• 高输出驱动电流：±70mA\n\n• 低差分增益/相位误差：0.01%/0.01° (MAX4104/4304)\n\n• 低输入失调电压：±1mV\n\n• 采用节省空间的5引脚SOT23封装;

ADI

亚德诺

TOSHIBA Power Transistor Module Silicon NPN Epitaxial Type (high gain power transistor 4 in 1)

High Power Switching Applications Hammer Drive, Pulse Motor Drive and Inductive Load Switching • Small package by full molding (SIP 12 pin) • High collector power dissipation (4-device operation) : PT = 4.4 W (Ta = 25°C) • High collector current: IC (DC) = 3 A (max) • High DC current gain

文件：140.58 Kbytes 页数：5 Pages

TOSHIBA

东芝

High Power Switching Applications Hammer Drive, Pulse Motor Drive and Inductive Load Switching

文件：148.06 Kbytes 页数：5 Pages

TOSHIBA

东芝

10 AMP, 75 VOLT MOSFET SMART POWER 3-PHASE MOTOR DRIVE HYBRID

文件：228.75 Kbytes 页数：6 Pages

MSK