High-Side Power and Current Monitors

General Description The MAX4210/MAX4211 low-cost, low-power, high-side power/current monitors provide an analog output voltage proportional to the power consumed by a load by multiplying load current and source voltage. The MAX4210/MAX4211 measure load current by using a high-side current-sense a

文件：620.06 Kbytes 页数：32 Pages

Maxim

美信

High-Side Power and Current Monitors

文件：676.41 Kbytes 页数：32 Pages

Maxim

美信

高边功率、电流监测器

MAX4210/MAX4211是低成本、低功耗、高边功率/电流监视器，提供与负载功耗成正比的模拟输出电压，负载功耗用负载电流乘以源极电压计算。MAX4210/MAX4211利用高边电流检测放大器来测量负载电流，由于不影响负载的接地通道，使其尤其适合电池供电系统。\n\n MAX4210是简单的小尺寸、6引脚功率监视器，专为电路板空间受限的应用而设计。MAX4210A/B/C内部集成了25:1的电阻分压网络，可以减少元件数。MAX4210D/E/F使用外部电阻分压网络，提供更强的设计灵活性。\n\n MAX4211是功能完整的电流与功率监视器。该器件集成了高边电流检测放大器、 • 电流与功率实时监视\n• ±1.5% (最大值)电流检测精度\n• ±1.5% (最大值)功率检测精度\n• 两个独立的比较器(MAX4211)\n• 1.21V基准输出(MAX4211)\n• 三种电流/功率增益选项\n• 100mV/150mV电流检测满量程电压\n• 输入源极电压范围：+4V至+28V\n• 电源电压范围：+2.7V至+5.5V\n• 低电源电流：380µA\n• 220kHz带宽\n• 小尺寸、6引脚TDFN与8引脚µMAX封装(MAX4210);

ADI

亚德诺

MAX4210E Evaluation Kit

General Description The MAX4210/MAX4211 low-cost, low-power, high-side power/current monitors provide an analog output voltage proportional to the power consumed by a load by multiplying load current and source voltage. The MAX4210/MAX4211 measure load current by using a high-side current-sense a

文件：309.2 Kbytes 页数：4 Pages

Maxim

美信

High-Side Power and Current Monitors

General Description The MAX4210/MAX4211 low-cost, low-power, high-side power/current monitors provide an analog output voltage proportional to the power consumed by a load by multiplying load current and source voltage. The MAX4210/MAX4211 measure load current by using a high-side current-sense a

文件：620.06 Kbytes 页数：32 Pages

Maxim

美信

High-Side Power and Current Monitors

General Description The MAX4210/MAX4211 low-cost, low-power, high-side power/current monitors provide an analog output voltage proportional to the power consumed by a load by multiplying load current and source voltage. The MAX4210/MAX4211 measure load current by using a high-side current-sense a

文件：620.06 Kbytes 页数：32 Pages

Maxim

美信

MAX4210E Evaluation Kit

General Description The MAX4210/MAX4211 low-cost, low-power, high-side power/current monitors provide an analog output voltage proportional to the power consumed by a load by multiplying load current and source voltage. The MAX4210/MAX4211 measure load current by using a high-side current-sense a

文件：309.2 Kbytes 页数：4 Pages

Maxim

美信

MAX4210E Evaluation Kit

General Description The MAX4210/MAX4211 low-cost, low-power, high-side power/current monitors provide an analog output voltage proportional to the power consumed by a load by multiplying load current and source voltage. The MAX4210/MAX4211 measure load current by using a high-side current-sense a

文件：309.2 Kbytes 页数：4 Pages

Maxim

美信

High-Side Power and Current Monitors

General Description The MAX4210/MAX4211 low-cost, low-power, high-side power/current monitors provide an analog output voltage proportional to the power consumed by a load by multiplying load current and source voltage. The MAX4210/MAX4211 measure load current by using a high-side current-sense a

文件：620.06 Kbytes 页数：32 Pages

Maxim

美信

High-Side Power and Current Monitors

文件：676.41 Kbytes 页数：32 Pages

Maxim

美信