Single/Dual/Quad, 28MHz, Low-Noise, Low-Voltage, Precision Op Amps

General Description The MAX410/MAX412/MAX414 single/dual/quad op amps set a new standard for noise performance in high-speed, low-voltage systems. Input voltage-noise density is guaranteed to be less than 2.4nV/√Hz at 1kHz. A unique design not only combines low noise with ±5V operation, but also

文件：461.17 Kbytes 页数：12 Pages

Maxim

美信

Single/Dual/Quad, 28MHz, Low-Noise, Low-Voltage, Precision Op Amps

文件：325.27 Kbytes 页数：16 Pages

Maxim

美信

单通道/双通道/四通道、28MHz、低噪声、低电压、精密运算放大器

MAX410/MAX412/MAX414单通道/双通道/四通道运算放大器为高速、低压系统的噪声性能设立了新标准。在1kHz时，输入电压噪声密度确保小于2.4nV/root-Hz。专门的设计不仅噪声低、支持±5V工作，而且每个放大器的电源电流消耗仅为2.5mA。使用±5V电源供电时，输出电压摆幅为7.3VP-P，可确保2kΩ下的低电压工作。MAX410/MAX412/MAX414还可以在±2.4V和±5V之间的电源电压下工作，以实现更大的电源灵活性。\n\n 单位增益稳定性、28MHz带宽和4.5V/µs压摆率可确保在各种宽带和测量应用中提供低噪声性能。MAX410/MAX412/MA • 电压噪声：1kHz时为2.4nV/root-Hz（最大值）\n\n• 2.5mA电源电流（每个放大器）\n\n• 低电源电压供电：±2.4V至±5V\n\n• 单位增益带宽：28MHz\n\n• 压摆率：4.5V/µs\n\n• 失调电压：250µV（最大值，MAX410/MAX412）\n\n• 电压增益：115dB（最小值）\n\n• 采用超小型TDFN封装;

ADI

亚德诺

330MHz, 4x1 Precision Video Multiplexer

General Description The MAX4141 is a wideband 330MHz, 700V/µs 4x1 multiplexer optimized for high-definition, broadcast quality, composite (HDTV, NTSC, PAL, SECAM) video switching arrays. The device includes four open-loop buffer amplifiers with a 0.1dB gain flatness of 150MHz, and enable and swit

文件：69.89 Kbytes 页数：8 Pages

Maxim

美信

330MHz, 4x1 Precision Video Multiplexer

General Description The MAX4141 is a wideband 330MHz, 700V/µs 4x1 multiplexer optimized for high-definition, broadcast quality, composite (HDTV, NTSC, PAL, SECAM) video switching arrays. The device includes four open-loop buffer amplifiers with a 0.1dB gain flatness of 150MHz, and enable and swit

文件：69.89 Kbytes 页数：8 Pages

Maxim

美信

250MHz, Low-Power, High-Output-Current, Differential Line Driver

General Description The MAX4142 differential line driver combines high-speed performance with fully symmetrical differential inputs and outputs. With an internally set +2V/V closed-loop gain, the MAX4142 is ideal for driving back-terminated cables and transmission lines. Features ♦ 250MHz -3dB

文件：120.18 Kbytes 页数：12 Pages

Maxim

美信

250MHz, Low-Power, High-Output-Current, Differential Line Driver

General Description The MAX4142 differential line driver combines high-speed performance with fully symmetrical differential inputs and outputs. With an internally set +2V/V closed-loop gain, the MAX4142 is ideal for driving back-terminated cables and transmission lines. Features ♦ 250MHz -3dB

文件：120.18 Kbytes 页数：12 Pages

Maxim

美信

High-Speed, Low-Distortion, Differential Line Receivers

General Description The MAX4144/MAX4145/MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp instrumentation amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They operate from ±5V

文件：212.1 Kbytes 页数：16 Pages

Maxim

美信

High-Speed, Low-Distortion, Differential Line Receivers

General Description The MAX4144/MAX4145/MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp instrumentation amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They operate from ±5V

文件：212.1 Kbytes 页数：16 Pages

Maxim

美信

High-Speed, Low-Distortion, Differential Line Receivers

General Description The MAX4144/MAX4145/MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp instrumentation amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They operate from ±5V

文件：212.1 Kbytes 页数：16 Pages

Maxim

美信