Single/Dual/Quad, Wide-Bandwidth, Low-Power, Single-Supply Rail-to-Rail I/O Op Amps

General Description The MAX4122–MAX4129 family of operational amplifiers combines wide bandwidth and excellent DC accuracy with Rail-to-Rail® operation at the inputs and outputs. These devices require only 650µA per amplifier, and operate from either a single supply (+2.7V to +6.5V) or dual suppl

文件：285.83 Kbytes 页数：16 Pages

Maxim

美信

单/双/四路、宽带、低功耗、单电源、满摆幅输入/输出运算放大器

MAX4122–MAX4129系列运算放大器不仅具有宽带宽和出色的直流精度，还提供输入和输出端的轨到轨操作。这些器件中每个放大器仅需要650µA，并采用单电源（+2.7V至+6.5V）或双电源（±1.35V至±3.25V）供电，共模电压范围超出VEE和VCC 250mV。它们能够驱动250Ω负载。MAX4122/MAX4123/MAX4126/MAX4127/MAX4129具有5MHz增益带宽积，同时非完全补偿MAX4124/MAX4125/MAX4128（闭环增益为10或更高时保持稳定）具有25MHz增益带宽积。此外，MAX4123/MAX4125/MAX4127还具有关断模式，在该模式下， • 5引脚SOT23封装(MAX4122/4)\n\n• +2.7V至+6.5V单电源供电\n\n• 轨到轨输入共模电压范围\n\n• 轨到轨输出电压摆幅\n\n• 增益带宽积：5MHz (MAX4122/3/6/7/9)\n\n• 增益带宽积：25MHz (MAX4124/5/8)\n\n• 每个放大器的静态电流：650µA\n\n• 25µA关断功能(MAX4123/5/7)\n\n• 失调电压：200µV\n\n• 过驱输入无反相\n\n• 驱动250Ω负载\n\n• 在500pF容性负载下保持稳定\n\n• 单位增益稳定(MAX4122/3/6/7/9)\n\n• 增益> 10V/V时;

ADI

亚德诺

Dual 1.5A-Peak Low-Side MOSFET Drivers in Advanced Packaging

文件：538.5 Kbytes 页数：8 Pages

MIC

昌福电子

Dual 1.5A-Peak Low-Side MOSFET Drivers in Advanced Packaging

文件：533.13 Kbytes 页数：8 Pages

Micrel

麦瑞半导体

Dual 1.5A-Peak Low-Side MOSFET Drivers in Advanced Packaging

General Description The MIC4126, MIC4127, and MIC4128 family are highly-reliable dual 1.5A low-side MOSFET drivers fabricated on Microchip’s BiCMOS/DMOS process. The devices feature low power consumption and high efficiency. The MIC4126/27/28 translate TTL or CMOS input logic levels to outpu

文件：846.54 Kbytes 页数：22 Pages

Microchip

微芯科技