Precision, 8-Channel/Dual 4-Channel, Low-Voltage, CMOS Analog Multiplexers

General Description The MAX398/MAX399 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 100Ω), which is matched to within 6Ω between channels and remains flat over the specified analog signal range (11Ωmax). They also offer low leakage over temperature (

文件：101.85 Kbytes 页数：12 Pages

Maxim

美信

高精度、8通道/双4通道、低电压、CMOS模拟多路复用器

MAX398/MAX399精密、单片、CMOS模拟多路复用器具有低导通电阻（小于100Ω），通道间匹配电阻在6Ω以内，并在额定模拟信号范围内保持平坦（最大11Ω）。其在整个温度范围内具有较低漏电流（+85°C时NO关断漏电流小于2.5nA）和快速开关速度（转换时间不到250ns）。MAX398为8通道器件，MAX399为双路4通道器件。\n\n MAX398/MAX399采用Maxim的低压硅栅工艺制造。改进的设计实现了超低的电荷注入（低于5pC），并确保提供大于2000V的静电放电保护(ESD)。\n\n 这些多路复用器采用+3V至+15V单电源或±3V至±8V双极性电源 • 与行业标准DG408/DG409/DG508A/DG509A引脚兼容\n\n• 确保通道间导通电阻匹配(< 6Ω)\n\n• 低导通电阻(< 100Ω)\n\n• 信号范围内确保平坦的导通电阻(< 11Ω)\n\n• 确保低电荷注入(< 5pC)\n\n• +85°C时NO关断漏电流< 1nA\n\n• +85°C时COM关断漏电流< 2.5nA\n\n• ESD保护> 2000V\n\n• +3V至+15V单电源供电或±3V至±8V双极性电源供电\n\n• 低功耗(< 300µW)\n\n• 轨到轨信号处理\n\n• TTL/CMOS逻辑兼容;

ADI

亚德诺

3.125Gbps XAUI Quad Equalizer

General Description The MAX3980 quad equalizer provides compensation for transmission medium losses for four “lanes” of digital NRZ data at a 3.125Gbps data rate in one package. It is tailor-made for 10-Gigabit Ethernet (10GbE) back plane applications requiring attenuation of noise and jitter t

文件：436.79 Kbytes 页数：9 Pages

Maxim

美信

3.125Gbps XAUI Quad Equalizer

General Description The MAX3980 quad equalizer provides compensation for transmission medium losses for four “lanes” of digital NRZ data at a 3.125Gbps data rate in one package. It is tailor-made for 10-Gigabit Ethernet (10GbE) back plane applications requiring attenuation of noise and jitter t

文件：436.79 Kbytes 页数：9 Pages

Maxim

美信

3.125Gbps XAUI Quad Equalizer

General Description The MAX3980 quad equalizer provides compensation for transmission medium losses for four “lanes” of digital NRZ data at a 3.125Gbps data rate in one package. It is tailor-made for 10-Gigabit Ethernet (10GbE) back plane applications requiring attenuation of noise and jitter t

文件：436.79 Kbytes 页数：9 Pages

Maxim

美信

3.125Gbps XAUI Quad Cable Equalizer

General Description The MAX3981 quad equalizer provides compensation for transmission medium losses for four “lanes” of digital NRZ data at a data rate of 3.125Gbps in one package. It is tailor-made for 10Gigabit Ethernet applications that require attenuation of noise and jitter that occur in c

文件：362.41 Kbytes 页数：9 Pages

Maxim

美信

3.125Gbps XAUI Quad Cable Equalizer

General Description The MAX3981 quad equalizer provides compensation for transmission medium losses for four “lanes” of digital NRZ data at a data rate of 3.125Gbps in one package. It is tailor-made for 10Gigabit Ethernet applications that require attenuation of noise and jitter that occur in c

文件：362.41 Kbytes 页数：9 Pages

Maxim

美信

SFP Copper-Cable Preemphasis Driver

General Description The MAX3982 is a single-channel, copper-cable preemphasis driver that operates from 1Gbps to 4.25Gbps. It provides compensation for copper links, such as 4.25Gbps Fibre Channel, allowing spans of up to 15m with 24AWG. The cable driver provides four selectable preemphasis

文件：1.13943 Mbytes 页数：15 Pages

Maxim

美信

SFP Copper-Cable Preemphasis Driver

General Description The MAX3982 is a single-channel, copper-cable preemphasis driver that operates from 1Gbps to 4.25Gbps. It provides compensation for copper links, such as 4.25Gbps Fibre Channel, allowing spans of up to 15m with 24AWG. The cable driver provides four selectable preemphasis

文件：1.13943 Mbytes 页数：15 Pages

Maxim

美信

1Gbps to 10Gbps Preemphasis Driver with Receive Equalizer

General Description The MAX3984 is a single-channel, preemphasis driver with input equalization that operates from 1Gbps to 10.3Gbps. It provides compensation for copper links, such as 8.5Gbps Fibre Channel and 10.3Gbps Ethernet, allowing spans of up to 10m with 24 AWG cable. The driver provide

文件：622.99 Kbytes 页数：18 Pages

Maxim

美信