Signal-Line Circuit Protectors

General Description The MAX366 and MAX367 are multiple, two-terminal circuit protectors. Placed in series with signal lines, each two-terminal device guards sensitive circuit components against voltages near and beyond the normal supply voltages. Features ♦ ±40V Overvoltage Protection ♦ O

文件：103.08 Kbytes 页数：12 Pages

Maxim

美信

信号通道电路保护器、三个独立的保护器

MAX366和MAX367是多路、双端电路保护器。每个双端器件都与信号线串联放置，可保护敏感电路元件，使其免受接近或超过正常电源电压的电压影响。这些器件用于敏感电路连接到外界的接口处，并且在上电、断电或故障条件下可能会遇到破坏性电压（超过电源轨高达35V）。\n\n MAX366和MAX367各包含三个和八个独立的保护器。它们可以使用单极（4.5V至36V）或双极（±2.25V至±18V）电源保护模拟信号。每个保护器均为对称结构。输入和输出端子可以自由互换。\n\n 这些器件均为压敏MOSFET晶体管阵列，加电时常开，断电时通常为开路。使用±10V电源时，在+25°C下的导 • ±40V过压保护\n\n• 断电时信号路径开路\n\n• 通电时信号路径电阻为100Ω\n\n• +25°C时的最大路径漏电流：1nA\n\n• 最大电源电压额定值：44V\n\n• 自动保护；无编程或控制;

ADI

亚德诺

Analog CATV Transimpedance Amplifier

General Description The MAX3660 high-linearity analog RF transimpedance amplifier (TIA) is intended for passive optical network (PON) video receiver applications. With 66dBΩ maximum variable gain and integrated uptilt, the MAX3660 provides 23dBmV/channel ±1dB at 870MHz (19dBmV/channel at 47MHz)

文件：250.99 Kbytes 页数：9 Pages

Maxim

美信

Analog CATV Transimpedance Amplifier

General Description The MAX3660 high-linearity analog RF transimpedance amplifier (TIA) is intended for passive optical network (PON) video receiver applications. With 66dBΩ maximum variable gain and integrated uptilt, the MAX3660 provides 23dBmV/channel ±1dB at 870MHz (19dBmV/channel at 47MHz)

文件：250.99 Kbytes 页数：9 Pages

Maxim

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3664 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 85mW. Operating from a single +3.3V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides a true differential ou

文件：236.65 Kbytes 页数：12 Pages

Maxim

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3664 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 85mW. Operating from a single +3.3V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides a true differential ou

文件：236.65 Kbytes 页数：12 Pages

Maxim

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3664 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 85mW. Operating from a single +3.3V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides a true differential ou

文件：236.65 Kbytes 页数：12 Pages

Maxim

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3664 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 85mW. Operating from a single +3.3V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides a true differential ou

文件：236.65 Kbytes 页数：12 Pages

Maxim

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3665 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 70mW at VCC = 3.3V. Operating from a single +3.3V or +5.0V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides

文件：584.52 Kbytes 页数：12 Pages

Maxim

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3665 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 70mW at VCC = 3.3V. Operating from a single +3.3V or +5.0V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides

文件：584.52 Kbytes 页数：12 Pages

Maxim

美信