Precision, Quad, SPST Analog Switches

General Description The MAX364/MAX365 are precision, quad, single-pole single-throw (SPST) analog switches. The MAX364 has four normally closed (NC), and the MAX365 has four normally open (NO) switches. Both parts offer low channel on-resistance (less than 85Ω), guaranteed to match within 2Ω betw

文件：89.6 Kbytes 页数：12 Pages

Maxim

美信

Precision, Quad, SPST Analog Switches

文件：334.04 Kbytes 页数：12 Pages

Maxim

美信

Precision, Quad, SPST Analog Switches

文件：357.72 Kbytes 页数：13 Pages

Maxim

美信

高精度、四路、SPST模拟开关

MAX364/MAX365是精密的、四通道、单刀单掷(SPST)模拟开关。MAX364具有四路常闭(NC)开关，而MAX365具有四路常开(NO)开关。这两种器件都具有较低导通阻抗(小于85Ω)，通道间匹配度保证在2Ω以内，并且在模拟信号范围内保持平坦(最大∆9Ω)。这两种器件还具有低漏电流(+25°C时小于500pA，+85°C时小于4nA)和快速切换(导通时间小于250ns，关断时间小于170ns)能力。\n\n MAX364/MAX365采用Maxim公司最新改进的44V硅栅工艺制造。设计上的改进保证了这两种器件具有非常低的电荷注入(10pC)、低功耗(35µW)和超过2000 • 低导通电阻：典型值< 45Ω (最大值85Ω)\n• 保证通道间导通电阻匹配度：< 2Ω\n• 在整个模拟信号范围内保证导通电阻平坦：最大∆9Ω\n• 保证极低的电荷注入：< 10pC\n• 在+85°C时，保证关断通道漏电流漏电流< 4nA\n• 采用方式3015.7时，保证ESD电压> 2000V\n• 可单电源工作(+10V至+30V)或双极性电源工作(±4.5V至±20V)\n• 兼容TTL/CMOS逻辑电平\n• 具有处理轨到轨模拟信号的能力;

ADI

亚德诺

3.3V, 622Mbps LVDS, Dual 4:2 Crosspoint Switch

General Description The MAX3640 is a dual-path crosspoint switch for use at OC-12 data rates. The MAX3640 can be used to receive and transmit 622Mbps low-voltage differential signals (LVDS) across a backplane with minimum jitter accumulation. Each path incorporates input buffers, multiplexers, a

文件：329.34 Kbytes 页数：12 Pages

Maxim

美信

3.3V, 622Mbps LVDS, Dual 4:2 Crosspoint Switch

General Description The MAX3640 is a dual-path crosspoint switch for use at OC-12 data rates. The MAX3640 can be used to receive and transmit 622Mbps low-voltage differential signals (LVDS) across a backplane with minimum jitter accumulation. Each path incorporates input buffers, multiplexers, a

文件：329.34 Kbytes 页数：12 Pages

Maxim

美信

Burst-Mode Laser Driver

General Description The MAX3643 burst-mode laser driver provides bias and modulation current drive for PON burst-mode ONT applications. It is specifically designed for use with a low-cost external controller for the APC (and if desired, AMC) loop. A high-speed differential burst-enable input enab

文件：266.64 Kbytes 页数：15 Pages

Maxim

美信

Burst-Mode Laser Driver

General Description The MAX3643 burst-mode laser driver provides bias and modulation current drive for PON burst-mode ONT applications. It is specifically designed for use with a low-cost external controller for the APC (and if desired, AMC) loop. A high-speed differential burst-enable input enab

文件：266.64 Kbytes 页数：15 Pages

Maxim

美信

Burst-Mode Laser Driver

General Description The MAX3643 burst-mode laser driver provides bias and modulation current drive for PON burst-mode ONT applications. It is specifically designed for use with a low-cost external controller for the APC (and if desired, AMC) loop. A high-speed differential burst-enable input enab

文件：266.64 Kbytes 页数：15 Pages

Maxim

美信

2.97V to 5.5V, 125Mbps to 200Mbps Limiting Amplifier with Loss-of-Signal Detector

General Description The MAX3645 limiting amplifier functions as a data quantizer and is pin compatible with the Mindspeed MC2045-2 and MC2045-2Y postamplifiers. The amplifier accepts a wide range of input voltages and provides constant-level positive emitter-coupled logic (PECL) output voltages w

文件：262.62 Kbytes 页数：10 Pages

Maxim

美信