2.5V, 1uA, 460kbps, RS-232-Compatible Transceivers

General Description The MAX3316–MAX3319 transceivers have a proprietary low-dropout transmitter output stage enabling RS-232-compatible performance from +2.25V to +3.0V with a dual-charge pump. These devices require only four 0.1µF capacitors, and are guaranteed to operate at data rates up to 460

文件：214.01 Kbytes 页数：15 Pages

Maxim

美信

2.5-V 460-kbps RS-232 TRANSCEIVER WITH ±15-kV ESD PROTECTION

1FEATURES • ESD Protection for RS-232 I/O Pins – ±15 kV (Human-Body Model) – ±8 kV (IEC 61000-4-2, Contact Discharge) – ±8 kV (IEC 61000-4-2, Air-Gap Discharge) • 300-μA Operating Supply Current • 1-μA Low-Power Standby (With Receivers Active) Mode • Designed to Transmit at a Data Rate of

文件：515.289 Kbytes 页数：22 Pages

TI

德州仪器

2.5-V 460-kbps RS-232 TRANSCEIVER WITH 짹15-kV ESD PROTECTION

文件：178.55 Kbytes 页数：18 Pages

TI

德州仪器

TRANSCEIVER WITH ESD PROTECTION

文件：776.08 Kbytes 页数：18 Pages

TI

德州仪器

具有 +/-15kV ESD 保护的 2.5V 双路 460kbps RS-232 线路驱动器/接收器

The MAX3318 is a dual-driver, dual-receiver, RS-232 compatible transceiver. The device features auto-power-down plus and enhanced electrostatic discharge (ESD) protection integrated into the chip. Driver output and receiver input are protected to ±8 kV using the IEC 61000-4-2 Air-Gap Discharge metho • ESD Protection for RS-232 I/O Pins \n• ±8 kV (IEC 61000-4-2, Contact Discharge)\n• 300-μA Operating Supply Current\n• Designed to Transmit at a Data Rate of 460 kbps\n• Operates From a Single 2.25-V to 3-V VCC Supply;

TI

德州仪器

2.5V、1µA、460kbps、RS-232兼容收发器

MAX3316–MAX3319配备专有的低压差发射器输出级，可利用双电荷泵通过+2.25V至+3.0V电源实现RS-232兼容性能。这些器件仅需要四个0.1µF电容，并支持以高达460kbps的数据速率运行。\n\n MAX3318/MAX3319均采用Maxim开创性的AutoShutdown Plus™功能，可实现1µA的电源电流。当RS-232电缆断开连接或所连外设的发射器处于非活动状态超过30秒时，这些器件会自动进入低功耗关断模式。当任何发射器或接收器输入端检测到有效转换时，这些器件会再次开启。AutoShutdown Plus无需更改现有的BIOS或操作系统也能实现节电。M • AutoShutdown Plus (MAX3318/MAX3319)\n\n• 工作电源电流：300µA\n\n• 接收器处于活动状态时关断的功耗低至1µA\n\n• 支持460kbps数据速率\n\n• 支持4V/µs摆率\n\n• RS-232兼容低至2.25V的电压;

ADI

亚德诺

2.5V, 1uA, 460kbps, RS-232-Compatible Transceivers

General Description The MAX3316–MAX3319 transceivers have a proprietary low-dropout transmitter output stage enabling RS-232-compatible performance from +2.25V to +3.0V with a dual-charge pump. These devices require only four 0.1µF capacitors, and are guaranteed to operate at data rates up to 460

文件：214.01 Kbytes 页数：15 Pages

Maxim

美信

丝印：MP318C；Package：SSOP；2.5-V 460-kbps RS-232 TRANSCEIVER WITH ±15-kV ESD PROTECTION

1FEATURES • ESD Protection for RS-232 I/O Pins – ±15 kV (Human-Body Model) – ±8 kV (IEC 61000-4-2, Contact Discharge) – ±8 kV (IEC 61000-4-2, Air-Gap Discharge) • 300-μA Operating Supply Current • 1-μA Low-Power Standby (With Receivers Active) Mode • Designed to Transmit at a Data Rate of

文件：515.289 Kbytes 页数：22 Pages

TI

德州仪器

丝印：MP318C；Package：SSOP；2.5-V 460-kbps RS-232 TRANSCEIVER WITH ±15-kV ESD PROTECTION

1FEATURES • ESD Protection for RS-232 I/O Pins – ±15 kV (Human-Body Model) – ±8 kV (IEC 61000-4-2, Contact Discharge) – ±8 kV (IEC 61000-4-2, Air-Gap Discharge) • 300-μA Operating Supply Current • 1-μA Low-Power Standby (With Receivers Active) Mode • Designed to Transmit at a Data Rate of

文件：515.289 Kbytes 页数：22 Pages

TI

德州仪器

丝印：MP318C；Package：TSSOP；2.5-V 460-kbps RS-232 TRANSCEIVER WITH ±15-kV ESD PROTECTION

1FEATURES • ESD Protection for RS-232 I/O Pins – ±15 kV (Human-Body Model) – ±8 kV (IEC 61000-4-2, Contact Discharge) – ±8 kV (IEC 61000-4-2, Air-Gap Discharge) • 300-μA Operating Supply Current • 1-μA Low-Power Standby (With Receivers Active) Mode • Designed to Transmit at a Data Rate of

文件：515.289 Kbytes 页数：22 Pages

TI

德州仪器