丝印：MP221EI；Package：SSOP；MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

文件：1.44457 Mbytes 页数：32 Pages

TI

德州仪器

丝印：MP221EI；Package：SOT-23-THIN；MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

文件：1.44457 Mbytes 页数：32 Pages

TI

德州仪器

丝印：MP221EI；Package：TSSOP；MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

文件：1.44457 Mbytes 页数：32 Pages

TI

德州仪器

丝印：MP221EI；Package：TSSOP；MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

文件：1.44457 Mbytes 页数：32 Pages

TI

德州仪器

丝印：MP221EI；Package：TSSOP；MAX3221E 3V to 5.5V Single-Channel RS-232 Line Driver and Receiver With ±15kV IEC ESD Protection

1 Features • ESD protection for RS-232 pins – ±15kV Human-body model (HBM) – ±8kV (IEC 61000-4-2, Contact discharge) – ±15kV (IEC 61000-4-2, Air-gap discharge) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates with 3V to 5.5V VCC supply • Operates up t

文件：1.44457 Mbytes 页数：32 Pages

TI

德州仪器

3-V TO 5.5-V SINGLE-CHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION

FEATURES · Controlled Baseline – One Assembly/Test Site, One Fabrication Site · Extended Temperature Performance of –55°C to 125°C · Enhanced Diminishing Manufacturing Sources (DMS) Support · Enhanced Product-Change Notification · Qualification Pedigree (1) · RS-232 Bus-Pin ESD Protectio

文件：394.72 Kbytes 页数：18 Pages

TI

德州仪器

MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

文件：1.08808 Mbytes 页数：27 Pages

TI

德州仪器

1μA Supply-Current, True 3V to 5.5V RS 232 Transceiver with AutoShutdown

General Description The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the on-board power supply and drivers shut down. This occurs if the RS-232 cabl

文件：318.71 Kbytes 页数：16 Pages

Maxim

美信

丝印：MB3221I；Package：SSOP；MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

3 Description The MAX3221 device consists of one line driver, one line receiver with dedicated enable pin, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232- F and provides the e

文件：1.13498 Mbytes 页数：27 Pages

TI

德州仪器

丝印：MB3221I；Package：SSOP；MAX3221 3-V to 5.5-V RS-232 Line Driver and Receiver With ±15-kV ESD Protection

1 Features • RS-232 Bus-pin ESD protection exceeds ±15 kV using human body model (HBM) • Meets or exceeds the requirements of TIA/EIA-232-F and ITU V.28 standards • Operates with 3-V to 5.5-V VCC supply • Operates up to 250 kbps • One driver and one receiver • Low standby current: 1 μA typ

文件：1.08808 Mbytes 页数：27 Pages

TI

德州仪器