Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers

General Description The MAX306/MAX307 precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than 100Ω), which is matched to within 5Ω between channels and remains flat over the specified analog signal range (7Ω, max). They also offer low leakage over temperature (I

文件：148.51 Kbytes 页数：12 Pages

Maxim

美信

Multiplexing the CS556x/7x/8x Delta-Sigma ADCs

1. INTRODUCTION The CS556x/7x/8x devices represent a new generation of delta-sigma analog-to-digital converters that compete with SAR (successive approximation register) converters, with some distinct advantages. The unique features of these over-sampling converters allow them to be multiplexed

文件：339.05 Kbytes 页数：10 Pages

CIRRUS

凌云逻辑

高精度、16通道/双8通道、高性能、CMOS模拟多路复用器

MAX306/MAX307精密、单片、CMOS模拟多路复用器具有低导通电阻（小于100Ω），通道间匹配电阻在5Ω以内，并在指定模拟信号范围内保持平坦（最大7Ω）。其在整个温度范围内具有较低漏电流（+85°C时INO(OFF)小于2.5nA）和快速开关速度（tTRANS不到250ns）。MAX306为单端1:16器件，MAX307为差分2:8器件。\n\n MAX306/MAX307采用Maxim改进的44V硅栅工艺制造。改进的设计实现了超低的电荷注入（低于10pC），并确保提供大于2000V的静电放电(ESD)保护。\n\n 这些多路复用器采用+5V至+30V单电源或±4. • 确保通道间导通电阻匹配，< 5Ω（最大值）\n\n• 低导通电阻，< 100Ω（最大值）\n\n• 在指定信号范围内确保平坦导通电阻，7Ω（最大值）\n\n• 保证电荷注入(< 10pC)\n\n• +85°C时INO(OFF)漏电流< 2.5nA\n\n• +85°C时ICOM(OFF)漏电流< 20nA\n\n• ESD保护> 2000V\n\n• 行业标准DG406/DG407/DG506A/DG507A的直接升级产品\n\n• 单电源供电（+5V至+30V）\n\n• 双极性电源供电（±4.5V至±20V）\n\n• 低功耗：< 1.25mW\n\n• 轨到轨信号处理\n\n• T;

ADI

亚德诺

3.3V, 짹15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

General Description The MAX3070E–MAX3079E 3.3V, ±15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic high i

文件：502.16 Kbytes 页数：25 Pages

Maxim

美信

3.3V, 짹15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

General Description The MAX3070E–MAX3079E 3.3V, ±15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic high i

文件：502.16 Kbytes 页数：25 Pages

Maxim

美信

3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

General Description The MAX3070E–MAX3079E 3.3V, ±15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic high i

文件：1.11241 Mbytes 页数：24 Pages

Maxim

美信

3.3V, 짹15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

General Description The MAX3070E–MAX3079E 3.3V, ±15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic high i

文件：502.16 Kbytes 页数：25 Pages

Maxim

美信

3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

General Description The MAX3070E–MAX3079E 3.3V, ±15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic high i

文件：1.11241 Mbytes 页数：24 Pages

Maxim

美信

3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

General Description The MAX3070E–MAX3079E 3.3V, ±15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic high i

文件：1.11241 Mbytes 页数：24 Pages

Maxim

美信

3.3V, 짹15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

General Description The MAX3070E–MAX3079E 3.3V, ±15kV ESD-protected, RS-485/RS-422 transceivers feature one driver and one receiver. These devices include fail-safe circuitry, guaranteeing a logic-high receiver output when receiver inputs are open or shorted. The receiver outputs a logic high i

文件：502.16 Kbytes 页数：25 Pages

Maxim

美信