Low-Cost RF Up/Downconverter with LNA and PA Driver

General Description The MAX2410 performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS standards Feature

文件：179.4 Kbytes 页数：12 Pages

Maxim

美信

Evaluation Kit

文件：82.99 Kbytes 页数：8 Pages

Maxim

美信

低成本、RF上/下变频器，带有LNA及PA驱动器

The MAX2410 performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS standards.\nThe MAX2410 contains a low-no • Low-Cost Bipolar Design \n• Integrated Upconvert/Downconvert Function \n• Operates from Single +2.7V to +5.5V Supply \n• 3.2dB Combined Receiver Noise Figure:\n• 2.4dB (LNA) \n• 9.8dB (Mixer)\n• Flexible Power-Amplifier Driver:\n• 18dBm Output Third-Order Intercept (OIP3) \n• 35dB Gain Control Ran;

ADI

亚德诺

Low-Cost RF Up/Downconverter with LNA and PA Driver

General Description The MAX2410 performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS standards Feature

文件：179.4 Kbytes 页数：12 Pages

Maxim

美信

Low-Cost RF Up/Downconverter with LNA and PA Driver

General Description The MAX2410 performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS standards Feature

文件：179.4 Kbytes 页数：12 Pages

Maxim

美信

Low-Cost RF Up/Downconverter with LNA and PA Driver

General Description The MAX2410 performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS standards Feature

文件：179.4 Kbytes 页数：12 Pages

Maxim

美信

Evaluation Kit

文件：82.99 Kbytes 页数：8 Pages

Maxim

美信

Evaluation Kit

文件：82.99 Kbytes 页数：8 Pages

Maxim

美信

15Gbps、八通道线性均衡器

MAX24101能够在接收器的均衡反馈判决(DFE)电路中恢复高频信号，补偿背板和电缆信道的高频损耗，使得DFE接收器满足BER指标。速率高达15Gbps时，MAX24101可以工作在FR4或电缆信道，补偿7.5GHz下高达30dB的高频损耗。线性传输函数对DFE均衡适配器提供透传，使得DFE自适应跟踪温度和通道条件的变化。 • 1Gbps至15Gbps线性均衡器 \n• 与CDR方案相比，具有低功耗、低成本、小尺寸\n• 即插即用—设置控制引脚(所有通道设置相同)，或通过I2C总线独立控制每个通道 \n• 可选择EQ峰值范围：+6dB - +19dB@7.5GHz \n• 可选择输出线性摆幅：700mVP-P - 1000mVP-P \n• 数据速率和编码相结合 \n• 不使用时，可控制关断，节省功耗\n• 2.5V单电源供电 \n• 每通道功耗131mW (700mVP-P输出);

ADI

亚德诺

15Gbps四通道线性均衡器

MAX24104能够在接收器的均衡反馈判决(DFE)电路中恢复高频信号，补偿背板和传输通道的高频损耗，使得DFE接收器满足BER指标。速率高达15Gbps时，MAX24104可以工作在FR4的传输线中，可补偿7.5GHz下高达30dB的高频损耗。线性传输函数对DFE自适应均衡提供透传，使得DFE自适应跟踪温度和通道条件的变化。器件与DFE一起集成到串行器/解串器(SERDES)，可提高系统设计裕量，而非单纯再生信号。与输出级限幅的传统均衡器不同，该器件保留了通道的线性特性，使得DEF在整个传输通道工作在线性状态，从而在改善信噪比(SNR)的同时扩展传输距离。在远距离传输中，器件提供高达19dB • 低功耗降低运营成本 \n• 单2.5V电源 \n• 700mVP-P输出时每通道的功耗为131mW (典型值) \n• 与CDR方案相比，具有低功耗、低成本、小尺寸 \n• 线性性能，具有较大系统灵活性 \n• 1Gbps至15Gbps线性均衡 \n• 提高高频信号电平，有助于Rx DFE满足BER指标要求 \n• 700mVP-P至1000mVP-P可选输出线性摆幅 \n• 输入回波损耗优于16dB (7.5GHz)\n• 可调节功能，具有较大灵活性 \n• 可选择EQ峰值范围：+6dB至+19dB@7.5GHz \n• 可选择平坦增益范围：-2.9dB至+1.7dB \n• 集成允许较;

ADI

亚德诺