5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

文件：395.78 Kbytes 页数：36 Pages

Maxim

美信

5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：377.33 Kbytes 页数：38 Pages

Maxim

美信

MAX220?밠AX249 5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：676.99 Kbytes 页数：38 Pages

Maxim

美信

+5V供电、多通道RS-232驱动器/接收器

MAX220–MAX249系列线驱动器/接收器，专为EIA/TIA-232E以及V.28/V.24通信接口设计，尤其是无法提供±12V电源的应用。\n\n MAX225、MAXX233、MAX235以及MAX245/MAX246/MAX247不需要外部元件，推荐用于印刷电路板面积有限的应用。\n\n MAX220–MAX249现有26种不同封装，可操作温度范围从0至+70°C，也可达到-55°C至+125°C。更多封装及温度选择，请参见数据资料末页订购信息。\n\n • 节省占位面积\n• 集成电荷泵电路\n• 去掉双极±12V供电 \n• 实现+5V供电时单电压操作\n\n\n \n• 集成电容(MAX223、MAX233、MAX235和MAX245–MAX247) \n• 节省功耗 \n• 5µW关断模式;

ADI

亚德诺

900MHz ISM-Band, 250mW Power Amplifiers with Analog or Digital Gain Control

General Description The MAX2232/MAX2233 low-voltage, silicon RF power amplifiers (PAs) are designed for use in the 900MHz ISM band. They operate from a single +2.7V to +5.5V supply, allowing them to be powered directly from a 3-cell NiCd or a 1-cell Lithium-Ion battery. The devices typically deli

文件：156.44 Kbytes 页数：8 Pages

Maxim

美信

900MHz ISM-Band, 250mW Power Amplifiers with Analog or Digital Gain Control

General Description The MAX2232/MAX2233 low-voltage, silicon RF power amplifiers (PAs) are designed for use in the 900MHz ISM band. They operate from a single +2.7V to +5.5V supply, allowing them to be powered directly from a 3-cell NiCd or a 1-cell Lithium-Ion battery. The devices typically deli

文件：156.44 Kbytes 页数：8 Pages

Maxim

美信

900MHz ISM-Band, 250mW Power Amplifiers with Analog or Digital Gain Control

General Description The MAX2232/MAX2233 low-voltage, silicon RF power amplifiers (PAs) are designed for use in the 900MHz ISM band. They operate from a single +2.7V to +5.5V supply, allowing them to be powered directly from a 3-cell NiCd or a 1-cell Lithium-Ion battery. The devices typically deli

文件：156.44 Kbytes 页数：8 Pages

Maxim

美信

3.6V, 1W Autoramping Power Amplifier for 900MHz Applications

General Description The MAX2235 low-voltage, silicon RF power amplifier (PA) is designed for use in the 900MHz frequency band. It operates directly from a single +2.7V to +5.5V supply, making it suitable for use with 3-cell NiCd or 1-cell Li-Ion batteries. The device delivers +30dBm (1W) typical

文件：149.59 Kbytes 页数：8 Pages

Maxim

美信

3.6V, 1W Autoramping Power Amplifier for 900MHz Applications

Features ● 800MHz to 1000MHz Operation ● High Output Power at 836MHz • +32.5dBm at +5.0V • +30dBm at +3.6V • +29dBm at +3.0V • +28dBm at +2.7V ● +2.7V to +5.5V Single-Supply Operation ● Automatic Power-Up/Power-Down Ramp ● Direct On/Off Keying (OOK) without Intersymbol Interference or VC

文件：1.08739 Mbytes 页数：8 Pages

AD

亚德诺

3.6V, 1W Autoramping Power Amplifier for 900MHz Applications

Features ● 800MHz to 1000MHz Operation ● High Output Power at 836MHz • +32.5dBm at +5.0V • +30dBm at +3.6V • +29dBm at +3.0V • +28dBm at +2.7V ● +2.7V to +5.5V Single-Supply Operation ● Automatic Power-Up/Power-Down Ramp ● Direct On/Off Keying (OOK) without Intersymbol Interference or VC

文件：1.08739 Mbytes 页数：8 Pages

AD

亚德诺