5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

文件：395.78 Kbytes 页数：36 Pages

Maxim

美信

5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：377.33 Kbytes 页数：38 Pages

Maxim

美信

MAX220?밠AX249 5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：676.99 Kbytes 页数：38 Pages

Maxim

美信

5-V DUAL RS-232 LINE DRIVER/RECEIVER WITH -15-kV ESD PROTECTION

文件：346.33 Kbytes 页数：15 Pages

TI

德州仪器

+5V供电、多通道RS-232驱动器/接收器

MAX220–MAX249系列线驱动器/接收器，专为EIA/TIA-232E以及V.28/V.24通信接口设计，尤其是无法提供±12V电源的应用。\n\n MAX225、MAXX233、MAX235以及MAX245/MAX246/MAX247不需要外部元件，推荐用于印刷电路板面积有限的应用。\n\n MAX220–MAX249现有26种不同封装，可操作温度范围从0至+70°C，也可达到-55°C至+125°C。更多封装及温度选择，请参见数据资料末页订购信息。\n\n • 节省占位面积\n• 集成电荷泵电路\n• 去掉双极±12V供电 \n• 实现+5V供电时单电压操作\n\n\n \n• 集成电容(MAX223、MAX233、MAX235和MAX245–MAX247) \n• 节省功耗 \n• 5µW关断模式;

ADI

亚德诺

36V, 1A Octal Integrated Serial-Controlled Solenoid and Motor Driver

General Description The MAX22200 is an octal 36V serial-controlled solenoid driver. Each channel features a low impedance (200mΩ typ) push-pull output stage with sink-and-source driving capability and up to 1ARMS driving current. A serial interface (SPI) that also supports daisy-chain configu

文件：874.32 Kbytes 页数：45 Pages

Maxim

美信

36V, 1A Octal Integrated Serial-Controlled Solenoid and Motor Driver

General Description The MAX22200 is an octal 36V serial-controlled solenoid driver. Each channel features a low impedance (200mΩ typ) push-pull output stage with sink-and-source driving capability and up to 1ARMS driving current. A serial interface (SPI) that also supports daisy-chain configu

文件：874.32 Kbytes 页数：45 Pages

Maxim

美信

65V, 7.6A High Current Single H-Bridge with Integrated Current-Sense

General Description The MAX22205 integrates a high current 65V, 7.6AMAX H-Bridge to drive one Brushed DC motor or one half Stepper motor. The H-Bridge FETs feature very low impedance, resulting in high driving efficiency and low heat. The typical total RON (high-side + low-side) is 0.15Ω. The H

文件：255.99 Kbytes 页数：22 Pages

AD

亚德诺

65V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense

General Description The MAX22208 provides four individually controllable 65V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance, resulting in high dri

文件：323.1 Kbytes 页数：19 Pages

AD

亚德诺

65V, 3.8A Quad Half H-Bridge Drivers with Integrated Current Sense

General Description The MAX22208 provides four individually controllable 65V, 3.8AMAX half H-bridge drivers. It can be used to drive four solenoids, two brushed DC motors, one single stepper motor, or a combination of different loads. The power FETs have very low impedance, resulting in high dri

文件：323.1 Kbytes 页数：19 Pages

AD

亚德诺