1.8V to 4.25V-Powered, True RS-232 Dual Transceiver

General Description The MAX218 RS-232 transceiver is intended for battery powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 a

文件：92.55 Kbytes 页数：8 Pages

MAXIM

美信

1.8V至4.25V供电、双路、真RS-232收发器

MAX218 RS-232收发器适用于电池供电的EIA/TIA-232E和V.28/V.24通信接口，需要两个驱动器和两个接收器，功耗较低。它提供+1.8V至+4.25V的宽工作电压范围，同时保持真正的RS-232和EIA/TIA-562电压电平。MAX218由两节碱性、镍镉或镍氢电池供电，无需任何稳压器。\n\n 关断模式可将功耗降至1µA，从而延长便携式系统的电池续航时间。关断时，所有接收器均可保持活动状态或在逻辑控制下禁用，因此采用CMOS MAX218的系统能够在低功耗关断模式下监控外部设备。\n\n 该器件支持120kbps的数据速率，与常用软件兼容，可用于与个人 优于双极性器件！\n• 直接由两节碱性、镍镉或镍氢电池供电\n\n• 电源电压范围：+1.8V至+4.25V\n\n• 120kbps数据速率\n\n• 低成本表贴元件\n\n• 符合EIA/TIA-232E规范\n\n• 低功耗关断模式：1µA\n\n• 在低功耗关断期间，两个接收器均有效\n\n• 三态接收器输出\n\n• 直通式引脚排列\n\n• 片上DC-DC转换器\n\n• 20引脚SSOP、宽体SO或DIP封装;

ADI

亚德诺

1.8V to 4.25V-Powered, True RS-232 Dual Transceiver

General Description The MAX218 RS-232 transceiver is intended for battery powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 a

文件：92.55 Kbytes 页数：8 Pages

MAXIM

美信

1.8V to 4.25V-Powered, True RS-232 Dual Transceiver

General Description The MAX218 RS-232 transceiver is intended for battery powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 a

文件：92.55 Kbytes 页数：8 Pages

MAXIM

美信

1.8V to 4.25V-Powered, True RS-232 Dual Transceiver

General Description The MAX218 RS-232 transceiver is intended for battery powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 a

文件：92.55 Kbytes 页数：8 Pages

MAXIM

美信

1.8V to 4.25V-Powered, True RS-232 Dual Transceiver

General Description The MAX218 RS-232 transceiver is intended for battery powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 a

文件：92.55 Kbytes 页数：8 Pages

MAXIM

美信

1.8V to 4.25V-Powered, True RS-232 Dual Transceiver

General Description The MAX218 RS-232 transceiver is intended for battery powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 a

文件：92.55 Kbytes 页数：8 Pages

MAXIM

美信

1.8V to 4.25V-Powered, True RS-232 Dual Transceiver

General Description The MAX218 RS-232 transceiver is intended for battery powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 a

文件：92.55 Kbytes 页数：8 Pages

MAXIM

美信

1.8V to 4.25V-Powered, True RS-232 Dual Transceiver

General Description The MAX218 RS-232 transceiver is intended for battery powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 a

文件：92.55 Kbytes 页数：8 Pages

MAXIM

美信

1.8V to 4.25V-Powered, True RS-232 Dual Transceiver

General Description The MAX218 RS-232 transceiver is intended for battery powered EIA/TIA-232E and V.28/V.24 communications interfaces that need two drivers and two receivers with minimum power consumption. It provides a wide +1.8V to +4.25V operating voltage range while maintaining true RS-232 a

文件：92.55 Kbytes 页数：8 Pages

MAXIM

美信