5V-Powered, Multichannel RS-232 Drivers/Receivers

General Description The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mod

文件：395.78 Kbytes 页数：36 Pages

MAXIM

美信

5V RS-232 Transceivers with 0.1uF External Capacitors

General Description MAX200-MAX209, MAX211, and MAX213 are a family of RS-232 and V.28 transceivers with integrated charge pump circuitry for single +5V supply operation. Benefts and Features ● Saves Board Space     • Integrated Charge Pump Circuitry Eliminates the Need for a Bipolar ±12V Suppl

文件：580.38 Kbytes 页数：20 Pages

MAXIM

美信

MAX211 5V Multichannel RS-232 Line Driver and Receiver with ±15kV ESD Protection

1 Features • RS-232 bus-pin ESD protection exceeds ±15kv using human-body model (HBM) • Meets or exceeds the requirements of TIA/ EIA-232-F and ITU v.28 standards • Operates at 5V V CC supply • Four drivers and five receivers • Operates up to 120kbit/s • Low supply current in shutdown mode

文件：1.22944 Mbytes 页数：22 Pages

TI

德州仪器

5-V MULTICHANNEL RS-232 LINE DRIVER / RECEIVER WITH -15-KV ESD PROTECTION

文件：294.95 Kbytes 页数：16 Pages

TI

德州仪器

5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH -15-KV ESD PROTECTION

文件：289.15 Kbytes 页数：17 Pages

TI

德州仪器

Transceivers External Capacitors

文件：4.81474 Mbytes 页数：20 Pages

ARTSCHIP

5-V MULTICHANNEL RS-232 LINE DRIVER/RECEVER

文件：349.42 Kbytes 页数：20 Pages

TI

德州仪器

5V, RS-232 Transceivers with 0.1關F External Capacitors

文件：2.12554 Mbytes 页数：23 Pages

MAXIM

美信

MAX220?밠AX249 5V-Powered, Multichannel RS-232 Drivers/Receivers

文件：676.99 Kbytes 页数：38 Pages

MAXIM

美信

+5V、RS-232收发器，0.1µF外部电容

MAX200-MAX209、MAX211和MAX213是一个RS-232和V.28收发器系列，集成了电荷泵电路，通过+5V单电源供电。\n\n 根据EIA/TIA-232E规范加载时，这些驱动器在超过120kbps的数据速率下保持±5V EIA/TIA-232E输出信号电平。\n\n MAX211和MAX213采用28引脚宽体小型(SO)封装和28引脚紧缩小型(SSOP)封装，后者仅占SO面积的40%。MAX207采用24引脚SO和24引脚SSOP封装。MAX203和MAX205不使用外部元件，推荐用于电路板空间有限的应用。\n\n   • 节省电路板空间\n• 集成电荷泵电路\n• 无需双极性±12V电源\n\n• 支持单电源供电：+5V或9V至+12V\n\n\n\n\n• 集成0.1μF电容（MAX203、MAX205）\n\n• 24引脚SSOP封装与SO封装相比可节省多达40%的空间\n\n\n\n\n• 省电，可延长电池运行时间\n• 5µW关断模式（MAX200、MAX205、MAX206、MAX211）\n\n• 提供75µW响铃指示监控，带有两个有源接收器(MAX213);

ADI

亚德诺