Dual 10-Bit, 80Msps, 3V, Low-Power ADC with Internal Reference and Parallel Outputs

General Description The MAX1181 is a 3V, dual 10-bit, analog-to-digital converter (ADC) featuring fully-differential wideband track-and-hold (T/H) inputs, driving two pipelined, nine stage ADCs. The MAX1181 is optimized for low-power, high-dynamic performance applications in imaging, instrumentat

文件：304.37 Kbytes 页数：20 Pages

Maxim

美信

Single-Ended or Fully Differential Signal Input Configuration

文件：497.32 Kbytes 页数：9 Pages

Maxim

美信

双路、10位、80Msps、3V供电、低功耗ADC，内置电压基准及并行输出

MAX1181是一款3V、双路、10位模数转换器(ADC)，具有全差分宽带采/样保持(T/H)输入，驱动两路流水线结构的九级ADC。MAX1181优化于低功耗、高动态性能的应用，如图像、仪表及数字通信系统。MAX1181工作在2.7V至3.6V单电源，耗电仅246mW，当输入频率为20MHz、采样速率为80Msps时提供59dB (典型值)的信噪比(SNR)。T/H驱动输入级包括400MHz (-3dB)输入放大器，转换器也可采用单端输入方式。MAX1181不仅具有低功耗特性，而且具有2.8mA休眠模式以及1µA关断模式，在空闲状态下可有效节省功耗。\n\n 内部2.048V精密带隙 • 3V单电源工作\n• 极佳的动态性能\n• fIN = 20MHz时59dB SNR\n• fIN = 20MHz时73dB SFDR\n\n\n• 低功耗\n• 82mA (标准工作模式)\n• 2.8mA (休眠模式)\n• 1µA (关断模式)\n\n\n• 0.02dB增益和0.25°相位匹配(典型值)\n• ±1VP-P较宽的差分模拟输入电压范围\n• -3dB输入带宽为400MHz\n• 片上+2.048V精密带隙基准\n• 用户可选的输出格式：2的补码或偏移二进制\n• 为改善散热条件提供48引脚焊盘裸露的TQFP封装\n• 提供评估板;

ADI

亚德诺

TacTouch™, Low-Power, Ultra-Small, Resistive Touch-Screen Controller with Haptic Driver

General Description The MAX11811 low-power touch-screen controller operates from a 1.7V to 3.6V single supply targeting powersensitive applications such as handheld equipment. The device contains a 12-bit SAR ADC and a multiplexer to interface with a resistive touch-screen panel. A digital serial

文件：816.13 Kbytes 页数：1 Pages

Maxim

美信

Dual 10-Bit, 80Msps, 3V, Low-Power ADC with Internal Reference and Parallel Outputs

General Description The MAX1181 is a 3V, dual 10-bit, analog-to-digital converter (ADC) featuring fully-differential wideband track-and-hold (T/H) inputs, driving two pipelined, nine stage ADCs. The MAX1181 is optimized for low-power, high-dynamic performance applications in imaging, instrumentat

文件：304.37 Kbytes 页数：20 Pages

Maxim

美信

Dual 10-Bit, 80Msps, 3V, Low-Power ADC with Internal Reference and Parallel Outputs

General Description The MAX1181 is a 3V, dual 10-bit, analog-to-digital converter (ADC) featuring fully-differential wideband track-and-hold (T/H) inputs, driving two pipelined, nine stage ADCs. The MAX1181 is optimized for low-power, high-dynamic performance applications in imaging, instrumentat

文件：304.37 Kbytes 页数：20 Pages

Maxim

美信

Pseudo Multi-Touch Demonstration

文件：6.81661 Mbytes 页数：23 Pages

Maxim

美信

Touch Evaluation System (TEVS)

文件：6.81661 Mbytes 页数：23 Pages

Maxim

美信

Touch Evaluation System (TEVS)

文件：6.81661 Mbytes 页数：23 Pages

Maxim

美信

Pseudo Multi-Touch Demonstration

文件：6.81661 Mbytes 页数：23 Pages

Maxim

美信