Single-Bus RS485/RS232 Multiprotocol Transceiver with Switchable Termination

DESCRIPTION The LTC®2873 is a robust pin-configurable multiprotocol transceiver that supports RS232, RS485, and RS422 protocols while operating on a single 3V to 5.5V supply. The LTC2873 can be configured as a half-duplex RS485 transceiver or as an RS232 transceiver using the same two bus pins.

文件：1.62623 Mbytes 页数：32 Pages

AD

亚德诺

6500VRMS Isolated RS485/RS422 μModule Transceiver Power

FEATURES - RS485/RS422 Transceiver: 6500VRMS for 1 Minute - CSA (IEC/UL) Approved, File #255632 - Isolated DC Power: 5V at 200mA - No External Components Required - 20Mbps or Low EMI 250kbps Data Rate - High ESD: ±15kV HBM on Transceiver Interface - High Common Mode Transient Immunity: 50kV

文件：1.59431 Mbytes 页数：22 Pages

AD

亚德诺

±60V Fault Protected 3V to 5.5V RS485/RS422 Transceiver with Level 4 IEC ESD

FEATURES - Protected from Overvoltage Line Faults to ±60V 3V to 5.5V Supply Voltage - 20Mbps or Low EMI 250kbps Data Rate - ±40kV HBM ESD Interface Pins, ±15kV Other Pins - Enhanced Receiver and Failsafe Noise Immunity - IEC Level 4 ESD and EFT on Interface Pins - Extended Common Mode Rang

文件：999.96 Kbytes 页数：24 Pages

AD

亚德诺

Isolated USB Data Transceiver

FEATURES - Isolated USB Transceiver: 7500VRMS for 1 Minute - CSA (IEC/UL) Approved, File #255632 - Reinforced Insulation - USB 2.0 Full Speed and Low Speed Compatible - Auto-Configuration of Bus Speed - 4.4V to 36V VBUS and VBUS2 Operating Range - 3.3V LDO Output Supply Signal References VL

文件：671.83 Kbytes 页数：18 Pages

AD

亚德诺

Isolated USB Transceiver with Isolated Power

FEATURES - LTM2884: 2500VRMS for 1 Minute - LTM2884(a): 3000VRMS for 1 Minute - LTM2884: UL Recognized File #E151738 - LTM2884(a): CSA Recognized File #255632 - USB 2.0 Full Speed and Low Speed Compatible - Integrated Isolated DC/DC Converter, External or Bus Powered - Auto-Configuration o

文件：1.42709 Mbytes 页数：24 Pages

AD

亚德诺

Isolated USB Data Transceiver

FEATURES - Isolated USB Transceiver: 7500VRMS for 1 Minute - CSA (IEC/UL) Approved, File #255632 - Reinforced Insulation - USB 2.0 Full Speed and Low Speed Compatible - Auto-Configuration of Bus Speed - 4.4V to 36V VBUS and VBUS2 Operating Range - 3.3V LDO Output Supply Signal References VL

文件：671.83 Kbytes 页数：18 Pages

AD

亚德诺

Isolated USB Transceiver with Isolated Power

FEATURES - LTM2884: 2500VRMS for 1 Minute - LTM2884(a): 3000VRMS for 1 Minute - LTM2884: UL Recognized File #E151738 - LTM2884(a): CSA Recognized File #255632 - USB 2.0 Full Speed and Low Speed Compatible - Integrated Isolated DC/DC Converter, External or Bus Powered - Auto-Configuration o

文件：1.42709 Mbytes 页数：24 Pages

AD

亚德诺

6500VRMS Isolated RS485/RS422 μModule Transceiver Power

FEATURES - RS485/RS422 Transceiver: 6500VRMS for 1 Minute - CSA (IEC/UL) Approved, File #255632 - Isolated DC Power: 5V at 200mA - No External Components Required - 20Mbps or Low EMI 250kbps Data Rate - High ESD: ±15kV HBM on Transceiver Interface - High Common Mode Transient Immunity: 50kV

文件：1.59431 Mbytes 页数：22 Pages

AD

亚德诺

Single-Bus RS485/RS232 Multiprotocol Transceiver with Switchable Termination

DESCRIPTION The LTC®2873 is a robust pin-configurable multiprotocol transceiver that supports RS232, RS485, and RS422 protocols while operating on a single 3V to 5.5V supply. The LTC2873 can be configured as a half-duplex RS485 transceiver or as an RS232 transceiver using the same two bus pins.

文件：1.62623 Mbytes 页数：32 Pages

AD

亚德诺

7.5kVRMS SPI/Digital or I2C 關Module Isolator with Transformer Driver

DESCRIPTION The LTM®2810 is a complete galvanic digital μModule® (micromodule) isolator. No external components are required. Individual 3V to 5.5V supplies power each side of the digital isolator. Separate logic supply pins allow easy interfacing with different logic levels from 1.62V to 5.

文件：1.3482 Mbytes 页数：30 Pages

AD

亚德诺