运算放大器

The LTC863x family of single-, dual-, and quad- channel operational amplifiers represents a new generation of general-purpose, low-power op-amps.Featuring railto-rail input and output (RRIO) swings, low quiescent current (typical 700 µA) combined with a wide bandwidth (9 MHz) and very low nois •  Wide Unity-Gain Bandwidth: 9 MHz\n•  High Slew Rate: 8.5 V/μs\n•  Fast Settling: 0.3 μs to 0.1%\n•  Low Noise: 13 nV/√Hz at 1 kHz\n•  Low Input Offset Voltage: ± 0.7 mV\n•  Single 2.3 V to 5.5 V Power Supply Range\n•  Rail-to-Rail Input and Output\n•  Internal RF/EMI Filter;

Linearin

先积集成

1x/1.5x/2x White LED Charge Pump with Two LDOs in 4mm x 4mm Thin QFN

General Description The MAX8631X/Y charge pump drives up to eight white LEDs with regulated constant current for uniform intensity. The main group of LEDs (M1–M4) can be driven up to 30mA per LED for backlighting. The flash group of LEDs (F1–F4) is independently controlled and can be driven up to

文件：399.16 Kbytes 页数：16 Pages

MAXIM

美信

1x/1.5x/2x White LED Charge Pump with Two LDOs in 4mm x 4mm Thin QFN

General Description The MAX8631X/Y charge pump drives up to eight white LEDs with regulated constant current for uniform intensity. The main group of LEDs (M1–M4) can be driven up to 30mA per LED for backlighting. The flash group of LEDs (F1–F4) is independently controlled and can be driven up to

文件：399.16 Kbytes 页数：16 Pages

MAXIM

美信

1x/1.5x/2x White LED Charge Pump with Two LDOs in 4mm x 4mm Thin QFN

General Description The MAX8631X/Y charge pump drives up to eight white LEDs with regulated constant current for uniform intensity. The main group of LEDs (M1–M4) can be driven up to 30mA per LED for backlighting. The flash group of LEDs (F1–F4) is independently controlled and can be driven up to

文件：399.16 Kbytes 页数：16 Pages

MAXIM

美信