LSF010x 1/2/8 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open- Drain and Push-Pull Applications

1 Features • Provides bidirectional voltage translation with no direction pin • Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30 pF cap load and up To 40-MHz up/down translation at 50 pF cap load • Allows bidirectional voltage-level translation betwee

文件：3.17475 Mbytes 页数：53 Pages

TI

德州仪器

LSF0102 2 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Applications

1 Features • Provides bidirectional voltage translation with no direction pin • Supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF capacitive load and up To 40MHz up or down translation at 50pF capacitive load • Allows bidirectional voltage-level transla

文件：2.03985 Mbytes 页数：42 Pages

TI

德州仪器

LSF0102-Q1 Automotive 2-Channel Auto Bidirectional Multi-Voltage Level Translator

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C ≤ TA ≤ 125°C – Device HBM ESD Classification Level 2 – CDM ESD Classification Level C6 • Provides bidirectional voltage translation with no direction Pin • Supports open drain and push-pull applications

文件：1.03975 Mbytes 页数：27 Pages

TI

德州仪器

LSF010x 1/2/8 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open- Drain and Push-Pull Applications

1 Features • Provides bidirectional voltage translation with no direction pin • Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30 pF cap load and up To 40-MHz up/down translation at 50 pF cap load • Allows bidirectional voltage-level translation betwee

文件：3.52881 Mbytes 页数：57 Pages

TI

德州仪器

Automotive 2-Channel Auto Bidirectional Multi-Voltage Level Translator

文件：405.79 Kbytes 页数：18 Pages

TI

德州仪器

LSF010x 1/2/8 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Applications

文件：2.51063 Mbytes 页数：40 Pages

TI

德州仪器

汽车类双通道双向多电压电平转换器

LSF0102-Q1 器件是一款自动双向电压转换器，无需方向引脚即可在广泛的电源范围内进行转换。当容性负载 ≤ 30pF 时，LSF0102-Q1 支持最高 100MHz 的升压转换和高于 100MHz 的降压转换。此外，当容性负载为 50pF 时，LSF0102-Q1 支持最高 40MHz 的上行和下行转换，因此，LSF0102-Q1 器件可支持汽车中各种常见的标准接口，如 I2C、SPI、GPIO、SDIO、UART 和 MDIO。\n\nLSF0102-Q1 器件具有 5V 耐受数据输入。因此该器件可兼容 TTL 电压电平。此外，LSF0102-Q1 还支持混合模式电压转换，可在各个通道 • 符合面向汽车应用的 AEC-Q100 标准 \n• 器件 HBM ESD 分类等级 2\n• 用无方向引脚提供双向电压转换\n• 在不超过 30pF 的容性负载条件下支持最高达 100MHz 的上行转换和超过 100MHz 的下行转换， 在 50pF 的容性负载条件下支持高达 40MHz 的上行/下行转换\n• 0.95V ↔ 1.8/2.5/3.3/5 V\n• 1.8V ↔ 2.5/3.3/5V\n• 3.3V ↔ 5V\n• 低待机电流\n• 低导通电阻，可减少信号失真\n• 采用直通引脚排列以简化 PCB 布线\n• 闩锁性能超过 100mA，符合 JESD 78 II 类规范的要;

TI

德州仪器

2-bit bidirectional multi-voltage level translator; open-drain; push-pull

1. General description The LSF0102-Q100 is a 2 channel bidirectional multi-voltage level translator for open-drain and push-pull applications. It supports up to 100 MHz up translation and ≥100 MHz down translation at ≤ 30 pF capacitive load. There is no need for a direction pin which minimizes

文件：211.64 Kbytes 页数：12 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司