TOUCH CONTROL LAMP DIMMER

DESCRIPTION: LS7231 through LS7234 are a series of monolithic, MOS integrated circuits designed for the control of brightness of incandescent lamps. The outputs of these ICs control the brightness of a lamp by controlling the firing angle of a triac connected in series with the lamp. All intern

文件：75.32 Kbytes 页数：8 Pages

LSI

TOUCH CONTROL LAMP DIMMER

DESCRIPTION: LS7232ND is a MOS integrated circuit designed to control brightness of incandescent lamps. The output of this IC controls the brightness of a lamp by controlling the firing angle of a triac connected in series with the lamp. All internal timings are synchronized with the

文件：48.82 Kbytes 页数：5 Pages

LSI

PROXIMITY/TOUCH CONTROL HALOGEN LAMP DIMMER

DESCRIPTION: LS7232NT is a CMOS integrated circuit designed for brightness control of incandescent lamps or tranformer coupled low voltage halogen lamps. The brightness is controlled by controlling the firing angle of a triac in series with the lamp and triggered by the LS7232NT. A Phase-Locked-L

文件：55.17 Kbytes 页数：7 Pages

LSI

TOUCH CONTROL LAMP DIMMER

DESCRIPTION: LS7231 through LS7234 are a series of monolithic, MOS integrated circuits designed for the control of brightness of incandescent lamps. The outputs of these ICs control the brightness of a lamp by controlling the firing angle of a triac connected in series with the lamp. All intern

文件：75.32 Kbytes 页数：8 Pages

LSI

TOUCH CONTROL LAMP DIMMER

DESCRIPTION: LS7231 through LS7234 are a series of monolithic, MOS integrated circuits designed for the control of brightness of incandescent lamps. The outputs of these ICs control the brightness of a lamp by controlling the firing angle of a triac connected in series with the lamp. All intern

文件：75.32 Kbytes 页数：8 Pages

LSI

TOUCH CONTROL LAMP DIMMER

DESCRIPTION: LS7231 through LS7234 are a series of monolithic, MOS integrated circuits designed for the control of brightness of incandescent lamps. The outputs of these ICs control the brightness of a lamp by controlling the firing angle of a triac connected in series with the lamp. All intern

文件：70.44 Kbytes 页数：8 Pages

LSI

TOUCH CONTROL LAMP STEP DIMMER

DESCRIPTION: LS7237 is a monolithic, MOS integrated circuit designed to control the brightness of an incandescent lamp. FEATURES: • PLL synchronization allows use as a Wall Switch • Provides brightness control of an incandescent lamp with a touch plate or mechanical switch • Can c

文件：43.44 Kbytes 页数：4 Pages

LSI

BRUSHLESS DC MOTOR COMMUTATOR/CONTROLLER

DESCRIPTION: The LS7260 / LS7262 are MOS integrated circuits designed to generate the signals necessary to control a three phase or four phase brushless DC motor. They are the basic building blocks of a brushless DC motor controller. The circuits respond to changes at the SENSE inputs, originatin

文件：79.58 Kbytes 页数：7 Pages

LSI

BRUSHLESS DC MOTOR COMMUTATOR/CONTROLLER

DESCRIPTION: The LS7260 / LS7262 are MOS integrated circuits designed to generate the signals necessary to control a three phase or four phase brushless DC motor. They are the basic building blocks of a brushless DC motor controller. The circuits respond to changes at the SENSE inputs, originatin

文件：79.58 Kbytes 页数：7 Pages

LSI

24-BIT DUAL-AXIS QUADRATURE COUNTER

FEATURES: • 30 MHz count frequency in non-quadrature mode, 17MHz in x4 quadrature mode. • Dual 24-bit counters to support X and Y axes in motion control applications. • Dual 24-bit comparators. • Digital filtering of the input quadrature clocks • Programmable 8-bit separate filter c

文件：71.14 Kbytes 页数：14 Pages

LSI