Multi-Channel DC-DC Converter for LCD Panel

The LP6286 includes a high-efficiency boost regulator, a gate pulse modulator (GPM), a voltage detector, a VCOM buffer, and dual charge pump controller for active matrix TFT LCDs. The converter is a high switching frequency current-mode regulator with an integrated N-Channel 0.2Ω MOSFET that allows · Wide VIN Range: 2.5V to 5.5V\n· 1.2MHz Current-Mode Boost Regulator\n·Fast Transient Response to Pulsed Load\n·Adjustable Output Voltage (±1%)\n·Built-In 3A, 0.2Ω N-MOSFET\n·High Efficiency Up to 90%\n·Internal Soft-Start\n· GPM Controller with Adjustable\n·Power-On Delay and Fall;

LPSemi

微源半导体

丝印：LPS；Package：QFN-24；Multi-Channel DC-DC Converter for LCD Panel

文件：505.79 Kbytes 页数：8 Pages

POWER

微源半导体

Low Noise, Low Power Op Amp

Description The Microchip Technology Inc. MCP6286 operational amplifier (op amp) has low noise (5.4 nV/√Hz, typical), low power (520 µA, typical) and rail-to-rail output operation. It is unity gain stable and has a gain bandwidth product of 3.5 MHz (typical). This device operates with a single su

文件：430.9 Kbytes 页数：28 Pages

Microchip

微芯科技

Low Noise, Low Power Op Amp

Description The Microchip Technology Inc. MCP6286 operational amplifier (op amp) has low noise (5.4 nV/√Hz, typical), low power (520 µA, typical) and rail-to-rail output operation. It is unity gain stable and has a gain bandwidth product of 3.5 MHz (typical). This device operates with a single su

文件：430.9 Kbytes 页数：28 Pages

Microchip

微芯科技

Low Noise, Low Power Op Amp

Description The Microchip Technology Inc. MCP6286 operational amplifier (op amp) has low noise (5.4 nV/√Hz, typical), low power (520 µA, typical) and rail-to-rail output operation. It is unity gain stable and has a gain bandwidth product of 3.5 MHz (typical). This device operates with a single su

文件：430.9 Kbytes 页数：28 Pages

Microchip

微芯科技