丝印：LM239；Package：SOIC；LM339B, LM2901B, LM339, LM239, LM139, LM2901 Quad Differential Comparators

1 Features • NEW LM339B and LM2901B • Improved specifications of B-version – Maximum rating: up to 38 V – ESD rating (HBM): 2k V – Low input offset: 0.37 mV – Low input bias current: 3.5 nA – Low supply-current: 200 μA per comparator – Faster response time of 1 μsec – Extended temperature

文件：2.26099 Mbytes 页数：51 Pages

TI

德州仪器

Quad Differential Comparator

The UTC LM239 consists of four independent voltagecomparators, designed specifically to operate from a singlepower supply over a wide voltage range. Signal or Dual Supply Operation Wide Operating Supply Range (VCC=2V~36V) Input Common-Mode Voltage Includes Ground. Low Supply Current ICC=1.1mA (Typical) Open Collector Outputs for Wired and Connection Low Input Bias Current IBIAS=25nA (Typical) Low Output Saturation Voltage Output Compatible with ;

UTC

友顺

低功耗四电压比较器

This family of devices consists of four independent precision-voltage comparators with an offset voltage specification as low as 2 mV maximum for LM339A, LM239A, and LM139A. Each comparator has been designed specifically to operate from a single power supply over a wide range of voltages. Operation • Wide single supply voltage range or dual supplies for all devices: +2 to +36 V or ±1 V to ±18 V \n• Very low supply current (1.1 mA) independent of supply voltage \n• Low input bias current: 25 nA typ \n• Low input offset current: ±5 nA typ \n• Low input offset voltage: ±1 mV typ \n• Input common-;

ST

意法半导体

比较器，四路，单电源，36 V

This comparator is designed for use in level detection, low-level sensing and memory applications in consumer automotive and industrial electronic applications. • Single or Split Supply Operation\n• Low Input Bias Current: 25 nA (Typ)\n• Low Input Offset Current:+/- 5.0 nA (Typ)\n• Input Common Mode Voltage Range to Gnd\n• Low Output Saturation Voltage: 130 mV (Typ) @ 4.0 mA\n• TTL and CMOS Compatible\n• ESD Clamps on the Inputs Increase Reliability without;

ONSEMI

安森美半导体

LOWPOWER QUAD VOLTAGE COMPARATORS

DESCRIPTION These devices consist of four independent precision voltage comparators with an offset voltage specifications as low as 2mV max for LM339A, LM239A and LM139A. All these comparators were designed specifically to operate from a single power supply over a wide range of voltages. Operatio

文件：163.52 Kbytes 页数：10 Pages

STMICROELECTRONICS

意法半导体

QUAD DIFFERENTIAL COMPARATOR

1FEATURES • Wide Supply Ranges – Single Supply: 2 V to 36 V (Tested to 30 V for Non-V Devices and 32 V for V-Suffix Devices) – Dual Supplies: ±1 V to ±18 V (Tested to ±15 V for Non-V Devices and ±16 V for V-Suffix Devices) • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (

文件：535.09 Kbytes 页数：17 Pages

TI

德州仪器

QUAD DIFFERENTIAL COMPARATOR

Qualified for Automotive Applications ESD Protection Exceeds 1000 V Per MIL-STD-883, Method 3015; Exceeds 100 V Using Machine Model (C = 200 pF, R = 0); Exceeds 2000 V Charged Device Model Single Supply or Dual Supplies Wide Range of Supply Voltage . . . 2 V to 36 V Low Supply-Current Drai

文件：380.2 Kbytes 页数：11 Pages

TI

德州仪器

LM339B, LM2901B, LM339, LM239, LM139, LM2901 Quad Differential Comparators

1 Features • NEW LM339B and LM2901B • Improved specifications of B-version – Maximum rating: up to 38 V – ESD rating (HBM): 2k V – Low input offset: 0.37 mV – Low input bias current: 3.5 nA – Low supply-current: 200 μA per comparator – Faster response time of 1 μsec – Extended temperature

文件：2.26099 Mbytes 页数：51 Pages

TI

德州仪器

LM339B, LM2901B, LM339, LM239, LM139, LM2901 Quad Differential Comparators

1 Features • NEW LM339B and LM2901B • Improved specifications of B-version – Maximum rating: up to 38 V – ESD rating (HBM): 2k V – Low input offset: 0.37 mV – Low input bias current: 3.5 nA – Low supply-current: 200 μA per comparator – Faster response time of 1 μsec – Extended temperature

文件：1.58709 Mbytes 页数：48 Pages

TI

德州仪器

LM339B, LM2901B, LM339, LM239, LM139, LM2901 Quad Differential Comparators

1 Features • NEW LM339B and LM2901B • Improved specifications of B-version – Maximum rating: up to 38 V – ESD rating (HBM): 2k V – Low input offset: 0.37 mV – Low input bias current: 3.5 nA – Low supply-current: 200 μA per comparator – Faster response time of 1 μsec – Extended temperature

文件：1.30407 Mbytes 页数：48 Pages

TI

德州仪器