High Voltage Green-Mode PWM Controller with BNO Function

General Description The LD5762E1 is a green-mode PWM IC built-in with brown-in/ out functions in a SOP-7/SOP-8 package. The device could therefore minimize the component counts, circuit space, and reduces the overall material cost of power applications. The LD5762E1 features HV start, sleep-

文件：579.12 Kbytes 页数：19 Pages

LEADTREND

通嘉科技

丝印：LD5762E1GR；Package：SOP-7；High Voltage Green-Mode PWM Controller with BNO Function

General Description The LD5762E1 is a green-mode PWM IC built-in with brown-in/ out functions in a SOP-7/SOP-8 package. The device could therefore minimize the component counts, circuit space, and reduces the overall material cost of power applications. The LD5762E1 features HV start, sleep-

文件：579.12 Kbytes 页数：19 Pages

LEADTREND

通嘉科技

丝印：LD5762E1GS；Package：SOP-8；High Voltage Green-Mode PWM Controller with BNO Function

General Description The LD5762E1 is a green-mode PWM IC built-in with brown-in/ out functions in a SOP-7/SOP-8 package. The device could therefore minimize the component counts, circuit space, and reduces the overall material cost of power applications. The LD5762E1 features HV start, sleep-

文件：579.12 Kbytes 页数：19 Pages

LEADTREND

通嘉科技

High Voltage Green-Mode PWM Controller with BNO Function

The LD5762E1 is a green-mode PWM IC built-in with brown-in/ out functions in a SOP-7/SOP-8 package. The device could therefore minimize the component counts, circuit space, and reduces the overall material cost of power applications.\n\nThe LD5762E1 features HV start, sleep-mode, green-mode power-sa • Secondary-side feedback control with quasi-resonant + CCM operation\n• High-Voltage (700V) Startup Circuit\n• Operating Current: 0.25mA(VCOMP=0)\n• Built-in Brown-in/out Function on HV pin\n• Built- in X-Cap Discharge on HV pin\n• OVP (Over Voltage Protection) on VCC/FB\n• UVP (Over Voltage Protec;

Leadtrend

通嘉科技