for car body applications

Description The L5958 includes 6 linear voltage regulators and a 2 A power switch, working down to 4.5 V battery level. All the voltage regulators can be switched off through the three enable pins. Features ■ L5958 six outputs: – 8.5 V @ 200 mA – 5.0 V @ 300 mA – 3.3 V @ 250 mA

文件：1.8271 Mbytes 页数：22 Pages

STMICROELECTRONICS

意法半导体

Integrated solenoid driver for automotive applications

Features • Automotive qualified • Excitation switch S1 = 60mΩ • Recirculation switch S2 = 60 mΩ • CMOS compatible inputs • Load current up to 14 A • Integrated clamp structure – Switch S1 clamp voltage = 45 V (minimum) • Current sense amplifier with internal sense resistor • S1 switch PW

文件：2.14268 Mbytes 页数：46 Pages

STMICROELECTRONICS

意法半导体

集成电磁阀驱动器，用于汽车应用

The L99SD01-E is a device intended for driving inductive loads.\n\n The inputs are CMOS-compatible. The diagnostic outputs CLAMP_FLAG and FAULT provide an indication of demagnetization mode and fault conditions, respectively.\n\n The integrated standard serial interface (I2C) allows to digitally set • Excitation switch S1 = 60 mΩ \n• Recirculation Switch S2= 60 mΩ \n• CMOS compatible Inputs \n• Load current up to 14 A \n• Integrated clamp structure \n •Switch S1clamp voltage = 45 V (minimum) \n• Current sense amplifier with internal sense resistor \n• S1switch PWM operation above 10 KHz• I2C st;

ST

意法半导体

Integrated solenoid driver for automotive applications

Features • Automotive qualified • Excitation switch S1 = 60mΩ • Recirculation switch S2 = 60 mΩ • CMOS compatible inputs • Load current up to 14 A • Integrated clamp structure – Switch S1 clamp voltage = 45 V (minimum) • Current sense amplifier with internal sense resistor • S1 switch PW

文件：2.14268 Mbytes 页数：46 Pages

STMICROELECTRONICS

意法半导体