High voltage half bridge driver with oscillator

Features ■ High voltage rail up to 600 V ■ BCD off line technology ■ 15.6 V Zener clamp on Vs ■ Driver current capability: – Sink current = 270 mA – Source current = 170 mA ■ Very low start up current: 150 mA ■ Undervoltage lockout with hysteresis ■ Programmable oscillator frequency ■ De

文件：234.5 Kbytes 页数：12 Pages

STMICROELECTRONICS

意法半导体

High voltage half bridge driver with oscillator

文件：234.5 Kbytes 页数：12 Pages

STMICROELECTRONICS

意法半导体

带振荡器的高压半桥驱动器

The device is a high voltage half bridge driver with built in oscillator. The frequency of the oscillator can be programmed using external resistor and capacitor. The internal circuitry of the device allows it to be driven also by external logic signal.\n\n The output drivers are designed to drive e • ESD PROTECTION \n• dV/dt IMMUNITY UP TO ±50V/ns \n• PROGRAMMABLE OSCILLATOR FREQUENCY \n• UNDER VOLTAGE LOCKOUT WITH HYSTERESIS \n• HIGH VOLTAGE RAIL UP TO 600V \n• 15.6V ZENER CLAMP ON VS \n• BCD OFF LINE TECHNOLOGY \n• VERY LOW START UP CURRENT: 150µA \n• DEAD TIME 1.25µs (L6571A) or 0.72µs (L65;

ST

意法半导体

High voltage half bridge driver with oscillator

Features ■ High voltage rail up to 600 V ■ BCD off line technology ■ 15.6 V Zener clamp on Vs ■ Driver current capability: – Sink current = 270 mA – Source current = 170 mA ■ Very low start up current: 150 mA ■ Undervoltage lockout with hysteresis ■ Programmable oscillator frequency ■ De

文件：234.5 Kbytes 页数：12 Pages

STMICROELECTRONICS

意法半导体

HIGH VOLTAGE HALF BRIDGE DRIVER WITH OSCILLATOR

DESCRIPTION The device is a high voltage half bridge driver with built in oscillator. The frequency of the oscillator can be programmed using external resistor and capacitor. The internal circuitry of the device allows it to be driven also by external logic signal. ■HIGH VOLTAGE RAIL UP TO

文件：60.17 Kbytes 页数：7 Pages

STMICROELECTRONICS

意法半导体

HIGH VOLTAGE HALF BRIDGE DRIVER WITH OSCILLATOR

DESCRIPTION The device is a high voltage half bridge driver with built in oscillator. The frequency of the oscillator can be programmed using external resistor and capacitor. The internal circuitry of the device allows it to be driven also by external logic signal. ■HIGH VOLTAGE RAIL UP TO

文件：60.17 Kbytes 页数：7 Pages

STMICROELECTRONICS

意法半导体

High voltage half bridge driver with oscillator

Features ■ High voltage rail up to 600 V ■ BCD off line technology ■ 15.6 V Zener clamp on Vs ■ Driver current capability: – Sink current = 270 mA – Source current = 170 mA ■ Very low start up current: 150 mA ■ Undervoltage lockout with hysteresis ■ Programmable oscillator frequency ■ De

文件：234.5 Kbytes 页数：12 Pages

STMICROELECTRONICS

意法半导体

High voltage half bridge driver with oscillator

Features ■ High voltage rail up to 600 V ■ BCD off line technology ■ 15.6 V Zener clamp on Vs ■ Driver current capability: – Sink current = 270 mA – Source current = 170 mA ■ Very low start up current: 150 mA ■ Undervoltage lockout with hysteresis ■ Programmable oscillator frequency ■ De

文件：234.5 Kbytes 页数：12 Pages

STMICROELECTRONICS

意法半导体

High voltage half bridge driver with oscillator

Features ■ High voltage rail up to 600 V ■ BCD off line technology ■ 15.6 V Zener clamp on Vs ■ Driver current capability: – Sink current = 270 mA – Source current = 170 mA ■ Very low start up current: 150 mA ■ Undervoltage lockout with hysteresis ■ Programmable oscillator frequency ■ De

文件：234.5 Kbytes 页数：12 Pages

STMICROELECTRONICS

意法半导体

HIGH VOLTAGE HALF BRIDGE DRIVER WITH OSCILLATOR

DESCRIPTION The device is a high voltage half bridge driver with built in oscillator. The frequency of the oscillator can be programmed using external resistor and capacitor. The internal circuitry of the device allows it to be driven also by external logic signal. ■HIGH VOLTAGE RAIL UP TO

文件：60.17 Kbytes 页数：7 Pages

STMICROELECTRONICS

意法半导体