电压检测芯片

KEFAXIN

科发鑫

Compact medium speed thick film thermal printhead (8 dots / mm)

The KF2002-GC10A is a standard 24 V thick-film thermal printhead with a printing speed of 3 inches / second, developed mainly for label printers. Features 1) A new pin connector structure greatly reduces the size and weight. 2) A newly developed driving IC improves data transmission speed (8 MH

文件：180.24 Kbytes 页数：4 Pages

ROHM

罗姆

Compact medium speed thick film thermal printhead (8 dots / mm)

The KF2002-GD10A is a standard 24 V thick-film thermal printhead with a printing speed of 4 inches / second, developed mainly for label printers. The GD series is of the glazed component type and therefore excellent for thermal transfer printing. Features 1) A new pin connector structure greatly

文件：171.79 Kbytes 页数：4 Pages

ROHM

罗姆

Compact medium speed thick film thermal printhead (8 dots /mm)

Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF2002-GD31A. Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/s, the resulting print heads are the fastest in their class. This high-speed an

文件：72.74 Kbytes 页数：5 Pages

ROHM

罗姆

Compact high speed thick film thermal printhead (8dots/ mm)

Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF2002-GF41A . Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/s, the resulting printheads are the fastest in their class. The high-speed

文件：89.36 Kbytes 页数：5 Pages

ROHM

罗姆

Compact low voltage thick film thermal printhead (8dots / mm)

These compact, lightweight printheads have low power requirements and are intended for ECR and mobile applications. Drawing 7.2V, a maximum print speed of 2 inches per second is possible. Features 1) A wide range of power supply voltage, from 4.2V-8.5V, can be used to drive the printhead. This g

文件：86.32 Kbytes 页数：5 Pages

ROHM

罗姆

Compact low voltage thick film thermal printhead (8dots /mm)

KF2002-GF84A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuit voltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and naturally, handheld devices that demand printer heads which can operate with low

文件：88.87 Kbytes 页数：5 Pages

ROHM

罗姆

Compact low voltage thick film thermal printhead (8dots /mm)

KF2002-GF94A of low voltage thermal printheads have a 1.25-mm pitch connectors and reduced power supply circuit voltage requirements. This makes them useful for a wide range of applications, including CAT, FET-POS and naturally, handheld devices that demand printer heads which can operate with low

文件：87.99 Kbytes 页数：5 Pages

ROHM

罗姆

Compact low speed thick film thermal printhead (8 dots / mm)

The KF2002-GH10A is a compact and lightweight thick-film thermal printhead with a printing speed of 2 inches / second, developed mainly for ECRs. Features 1) A new pin connector structure greatly reduces the size and weight. 2) A newly developed 144-bit IC levels the strobe partition and reduce

文件：151.9 Kbytes 页数：4 Pages

ROHM

罗姆

Compact low speed thick film thermal printhead (8 dots / mm)

The KF2002-GK10A uses a highly-durable conductive protective film to handle label papers with top-coatings. With ROHM’s partial glaze construction, the KF2002-GK10A is a compact and lightweight thick-film thermal print head with printing speeds up to 3 inch / second. Features 1) The use of the n

文件：163.54 Kbytes 页数：4 Pages

ROHM

罗姆