Teccor짰 brand Thyristors Standard Bidirectional SIDACs

Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance region to a low on-state voltage. Conduction continues until the current is interrupted or drops be

文件：1.50101 Mbytes 页数：12 Pages

LITTELFUSE

力特

Teccor짰 brand Thyristors Standard Bidirectional SIDACs

Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance region to a low on-state voltage. Conduction continues until the current is interrupted or drops be

文件：1.50101 Mbytes 页数：12 Pages

LITTELFUSE

力特

Teccor짰 brand Thyristors Standard Bidirectional SIDACs

Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance region to a low on-state voltage. Conduction continues until the current is interrupted or drops be

文件：1.50101 Mbytes 页数：12 Pages

LITTELFUSE

力特

Teccor짰 brand Thyristors Standard Bidirectional SIDACs

Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance region to a low on-state voltage. Conduction continues until the current is interrupted or drops be

文件：431.95 Kbytes 页数：12 Pages

LITTELFUSE

力特

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG

200A POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：5.52857 Mbytes 页数：5 Pages

KG