Teccor짰 brand Thyristors Standard Bidirectional SIDACs

Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance region to a low on-state voltage. Conduction continues until the current is interrupted or drops be

文件：1.50101 Mbytes 页数：12 Pages

LITTELFUSE

力特

Drain Current ?밒D=9A@ TC=25C

DESCRIPTION • Drain Current –ID=9A@ TC=25℃ • Drain Source Voltage- : VDSS=600 (Min) APPLICATIONS • Designed especially for high voltage,high speed applications, such as off-line switching power supplies , UPS,AC and DC motor controls,relay and solenoid drivers.

文件：61.62 Kbytes 页数：2 Pages

ISC

无锡固电

N-Channel Silicon Power Mos-fet(F-II Series)

Features ● High speed switching ● Low on-resistance ● No secondary breakdown ● Low driving power ● High voltage ● VGSS = ±30V Guarantee ● Avalanche-proof Applications ● Switching regulators ● UPS ● DC-DC converters ● General purpose power amplifier

文件：174.15 Kbytes 页数：2 Pages

FUJI

富士通

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：363.11 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：363.11 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：363.11 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：363.11 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：363.11 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：363.11 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：363.11 Kbytes 页数：4 Pages

KG