ISOLATED RS-485 PROFIBUS TRANSCEIVER

文件：823.39 Kbytes 页数：25 Pages

TI

德州仪器

ISOLATED RS-485 PROFIBUS TRANSCEIVER

文件：823.28 Kbytes 页数：25 Pages

TI

德州仪器

丝印：ISO1176T；Package：SOIC(DW)；ISO1176T Isolated Profibus RS-485 Transceiver with Integrated Transformer Driver

1 Features • Meets or Exceeds the Requirements of EN 50170 and TIA/EIA-485-A • Signaling Rates up to 40 Mbps • Easy Isolated Power Design with Integrated Transformer Driver • Typical Efficiency > 60% (ILOAD = 100 mA) - see SLUU471 • Differential Output exceeds 2.1 V (54-Ω Load) • Low

文件：1.55892 Mbytes 页数：38 Pages

TI

德州仪器

丝印：ISO1176T；Package：SOIC(DW)；ISO1176T Isolated Profibus RS-485 Transceiver with Integrated Transformer Driver

1 Features • Meets or Exceeds the Requirements of EN 50170 and TIA/EIA-485-A • Signaling Rates up to 40 Mbps • Easy Isolated Power Design with Integrated Transformer Driver • Typical Efficiency > 60% (ILOAD = 100 mA) - see SLUU471 • Differential Output exceeds 2.1 V (54-Ω Load) • Low

文件：1.55892 Mbytes 页数：38 Pages

TI

德州仪器

丝印：ISO1176T；Package：SOIC(DW)；ISO1176T Isolated Profibus RS-485 Transceiver with Integrated Transformer Driver

1 Features • Meets or Exceeds the Requirements of EN 50170 and TIA/EIA-485-A • Signaling Rates up to 40 Mbps • Easy Isolated Power Design with Integrated Transformer Driver • Typical Efficiency > 60% (ILOAD = 100 mA) - see SLUU471 • Differential Output exceeds 2.1 V (54-Ω Load) • Low

文件：1.55892 Mbytes 页数：38 Pages

TI

德州仪器

丝印：ISO1176T；Package：SOIC(DW)；ISO1176T Isolated Profibus RS-485 Transceiver with Integrated Transformer Driver

1 Features • Meets or Exceeds the Requirements of EN 50170 and TIA/EIA-485-A • Signaling Rates up to 40 Mbps • Easy Isolated Power Design with Integrated Transformer Driver • Typical Efficiency > 60% (ILOAD = 100 mA) - see SLUU471 • Differential Output exceeds 2.1 V (54-Ω Load) • Low

文件：1.55892 Mbytes 页数：38 Pages

TI

德州仪器

丝印：ISO1176T；Package：SOIC(DW)；ISO1176T Isolated Profibus RS-485 Transceiver with Integrated Transformer Driver

1 Features • Meets or Exceeds the Requirements of EN 50170 and TIA/EIA-485-A • Signaling Rates up to 40 Mbps • Easy Isolated Power Design with Integrated Transformer Driver • Typical Efficiency > 60% (ILOAD = 100 mA) - see SLUU471 • Differential Output exceeds 2.1 V (54-Ω Load) • Low

文件：1.55892 Mbytes 页数：38 Pages

TI

德州仪器

40Mbps、半双工、隔离式 RS-485 和 RS-422 收发器

The ISO1176 device is an isolated differential line transceiver designed for use in PROFIBUS applications. The device is ideal for long transmission lines because the ground loop is broken to provide for operation with a much larger common-mode voltage range. The symmetrical isolation barrier of eac • Meets or Exceeds the Requirements of EN 50170 and TIA/EIA-485-A\n• Differential Output Exceeds 2.1 V (54-Ω Load)\n• Up to 160 Transceivers on a Bus\n• Fail-Safe Receiver for Bus Open, Short, Idle\n• Bus-Pin ESD Protection \n• 6-kV HBM Between Bus Pins and GND1\n• Safety and Regulatory Approvals \n;

TI

德州仪器

ISO1176T Isolated Profibus RS-485 Transceiver with Integrated Transformer Driver

1 Features • Meets or Exceeds the Requirements of EN 50170 and TIA/EIA-485-A • Signaling Rates up to 40 Mbps • Easy Isolated Power Design with Integrated Transformer Driver • Typical Efficiency > 60% (ILOAD = 100 mA) - see SLUU471 • Differential Output exceeds 2.1 V (54-Ω Load) • Low

文件：1.55892 Mbytes 页数：38 Pages

TI

德州仪器

ISO1176T Isolated Profibus RS-485 Transceiver with Integrated Transformer Driver

1 Features • Meets or Exceeds the Requirements of EN 50170 and TIA/EIA-485-A • Signaling Rates up to 40 Mbps • Easy Isolated Power Design with Integrated Transformer Driver • Typical Efficiency > 60% (ILOAD = 100 mA) - see SLUU471 • Differential Output exceeds 2.1 V (54-Ω Load) • Low

文件：1.55892 Mbytes 页数：38 Pages

TI

德州仪器