丝印：1044B；Package：SOIC(D)；ISO1044 Isolated CAN FD Transceiver in Small Package

1 Features • Meets the ISO 11898-2:2016 physical layer standard • Supports classic CAN up to 1 Mbps and FD (flexible data rate) up to 5 Mbps • Protection features – DC Bus Fault Protection Voltage: ±58 V – IEC ESD tolerance on bus pins: ±8 kV – HBM ESD tolerance on bus pins: ±10 kV – Driv

文件：2.16766 Mbytes 页数：37 Pages

TI

德州仪器

ISO1044 Isolated CAN FD Transceiver in Small Package

1 Features • Meets the ISO 11898-2:2016 physical layer standard • Supports classic CAN up to 1 Mbps and FD (flexible data rate) up to 5 Mbps • Protection features – DC Bus Fault Protection Voltage: ±58 V – IEC ESD tolerance on bus pins: ±8 kV – HBM ESD tolerance on bus pins: ±10 kV – Driv

文件：2.16766 Mbytes 页数：37 Pages

TI

德州仪器

丝印：1044B；Package：SOIC(D)；ISO1044 Isolated CAN FD Transceiver in Small Package

1 Features • Meets the ISO 11898-2:2016 physical layer standard • Supports classic CAN up to 1 Mbps and FD (flexible data rate) up to 5 Mbps • Protection features – DC Bus Fault Protection Voltage: ±58 V – IEC ESD tolerance on bus pins: ±8 kV – HBM ESD tolerance on bus pins: ±10 kV – Driv

文件：2.16766 Mbytes 页数：37 Pages

TI

德州仪器

丝印：1044B；Package：SOIC(D)；ISO1044 Isolated CAN FD Transceiver in Small Package

1 Features • Meets the ISO 11898-2:2016 physical layer standard • Supports classic CAN up to 1 Mbps and FD (flexible data rate) up to 5 Mbps • Protection features – DC Bus Fault Protection Voltage: ±58 V – IEC ESD tolerance on bus pins: ±8 kV – HBM ESD tolerance on bus pins: ±10 kV – Driv

文件：2.16766 Mbytes 页数：37 Pages

TI

德州仪器

ISO1044 Isolated CAN FD Transceiver in Small Package

1 Features • Meets the ISO 11898-2:2016 physical layer standard • Supports classic CAN up to 1 Mbps and FD (flexible data rate) up to 5 Mbps • Protection features – DC Bus Fault Protection Voltage: ±58 V – IEC ESD tolerance on bus pins: ±8 kV – HBM ESD tolerance on bus pins: ±10 kV – Driv

文件：2.16766 Mbytes 页数：37 Pages

TI

德州仪器

ISO1050 Isolated CAN Transceiver

1 Features • Meets the requirements of ISO11898-2 • 5000-VRMS isolation (ISO1050DW) • 2500-VRMS isolation (ISO1050DUB) • Fail-safe outputs • Low loop delay: 150 ns (typical), 210 ns (maximum) • 50-kV/μs typical transient immunity • Bus-fault protection of –27 V to 40 V • Driver (TXD) domi

文件：2.56708 Mbytes 页数：42 Pages

TI

德州仪器

丝印：ISO1050；Package：SOP(DUB)；ISO1050 Isolated CAN Transceiver

1 Features • Meets the requirements of ISO11898-2 • 5000-VRMS isolation (ISO1050DW) • 2500-VRMS isolation (ISO1050DUB) • Fail-safe outputs • Low loop delay: 150 ns (typical), 210 ns (maximum) • 50-kV/μs typical transient immunity • Bus-fault protection of –27 V to 40 V • Driver (TXD) domi

文件：2.56708 Mbytes 页数：42 Pages

TI

德州仪器

丝印：ISO1050；Package：SOP(DUB)；ISO1050 Isolated CAN Transceiver

1 Features • Meets the requirements of ISO11898-2 • 5000-VRMS isolation (ISO1050DW) • 2500-VRMS isolation (ISO1050DUB) • Fail-safe outputs • Low loop delay: 150 ns (typical), 210 ns (maximum) • 50-kV/μs typical transient immunity • Bus-fault protection of –27 V to 40 V • Driver (TXD) domi

文件：2.56708 Mbytes 页数：42 Pages

TI

德州仪器

丝印：ISO1050；Package：SOP(DUB)；ISO1050 Isolated CAN Transceiver

1 Features • Meets the requirements of ISO11898-2 • 5000-VRMS isolation (ISO1050DW) • 2500-VRMS isolation (ISO1050DUB) • Fail-safe outputs • Low loop delay: 150 ns (typical), 210 ns (maximum) • 50-kV/μs typical transient immunity • Bus-fault protection of –27 V to 40 V • Driver (TXD) domi

文件：2.56708 Mbytes 页数：42 Pages

TI

德州仪器

ISO1050 Isolated CAN Transceiver

1 Features • Meets the requirements of ISO11898-2 • 5000-VRMS isolation (ISO1050DW) • 2500-VRMS isolation (ISO1050DUB) • Fail-safe outputs • Low loop delay: 150 ns (typical), 210 ns (maximum) • 50-kV/μs typical transient immunity • Bus-fault protection of –27 V to 40 V • Driver (TXD) domi

文件：2.56708 Mbytes 页数：42 Pages

TI

德州仪器