ISL8489

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

5V,LowPower,HighSpeedorSlewRateLimited,RS-485/RS-422Transceivers TheIntersilRS-485/RS-422devicesareBiCMOS5Vpowered,singletransceiversthatmeetboththeRS-485andRS-422standardsforbalancedcommunication.Unlikecompetitivedevices,thisIntersilfamilyisspecifiedfor

ISL8489

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

ISL8489

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

ISL8489E

±15kV ESD Protected, 5V, Low Power, High Speed and Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers; • RS-485 I/O Pin ESD Protection ±15kV HBM\n• Class 3 ESD Level on all Other Pins >7kV HBM\n• High Data Rates (ISL8490E, ISL8491E) up to 10Mbps\n• Slew Rate Limited for Error Free Data Transmission (ISL8488E, ISL8489E)\n• Single Unit Load Allows up to 32 Devices on the Bus (See ISL4489E, ISL4491E for 256 Devices on Bus)\n• Low Quiescent Current:\n• 120µA (ISL8488E)\n• 140µA (ISL8489E)\n• 370µA (ISL8490E, ISL8491E)\n• -7V to +12V Common Mode Input Voltage Range\n• Three-State Rx and Tx Outputs (Except ISL8488E, ISL8490E)\n• Full Duplex Pinout\n• Operates from a Single +5V Supply (10% Tolerance)\n• Current Limiting and Thermal Shutdown for Driver Overload Protection\n• Pb-Free Plus Anneal Available (RoHS Compliant)\n;

The ISL8488E, ISL8489E, ISL8490E, ISL8491E devices are ESD protected, BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output and receiver input is protected against ±15kV ESD strikes, without latch-up. Unlike competitive versions, these Intersil devices are specified for 10% tolerance supplies (4. 5V to 5. 5V). These devices are configured for full duplex (separate Rx input and Tx output pins) applications, so they are ideal for RS-422 networks requiring high ESD tolerance on the bus pins. The ISL8488E, ISL8490E are 8 Ld versions without Rx and Tx output enables. The other two versions include Rx and Tx output enable pins in a standard 14 Ld pinout. The ISL8488E, ISL8489E utilize slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications. Data rates up to 10Mbps are achievable by using the ISL8490E, ISL8491E, which feature higher slew rates. The devices present a single unit load to the RS-485 bus, which allows a total of 32 transmitters and receivers on the network. For 1/8 unit load versions (256 devices on the bus), please refer to the ISL4489E, ISL4491E data sheet. Receiver (Rx) inputs feature a fail-safe if open design, which ensures a logic high Rx output if Rx inputs are floating. Driver (Tx) outputs are short circuit protected, even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive.

ISL8489EIB

-15kV ESD Protected, 5V, Low Power, High Speed and Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers

TheISL8488E,ISL8489E,ISL8490E,ISL8491EdevicesareESDprotected,BiCMOS,5Vpowered,singletransceiversthatmeetboththeRS-485andRS-422standardsforbalancedcommunication.Eachdriveroutputandreceiverinputisprotectedagainst±15kVESDstrikes,withoutlatch-up.Unlikecompetitive

ISL8489EIB-T

-15kV ESD Protected, 5V, Low Power, High Speed and Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers

TheISL8488E,ISL8489E,ISL8490E,ISL8491EdevicesareESDprotected,BiCMOS,5Vpowered,singletransceiversthatmeetboththeRS-485andRS-422standardsforbalancedcommunication.Eachdriveroutputandreceiverinputisprotectedagainst±15kVESDstrikes,withoutlatch-up.Unlikecompetitive

ISL8489EIBZ

-15kV ESD Protected, 5V, Low Power, High Speed and Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers

TheISL8488E,ISL8489E,ISL8490E,ISL8491EdevicesareESDprotected,BiCMOS,5Vpowered,singletransceiversthatmeetboththeRS-485andRS-422standardsforbalancedcommunication.Eachdriveroutputandreceiverinputisprotectedagainst±15kVESDstrikes,withoutlatch-up.Unlikecompetitive

ISL8489EIBZ-T

-15kV ESD Protected, 5V, Low Power, High Speed and Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers

TheISL8488E,ISL8489E,ISL8490E,ISL8491EdevicesareESDprotected,BiCMOS,5Vpowered,singletransceiversthatmeetboththeRS-485andRS-422standardsforbalancedcommunication.Eachdriveroutputandreceiverinputisprotectedagainst±15kVESDstrikes,withoutlatch-up.Unlikecompetitive

ISL8489IB

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

5V,LowPower,HighSpeedorSlewRateLimited,RS-485/RS-422Transceivers TheIntersilRS-485/RS-422devicesareBiCMOS5Vpowered,singletransceiversthatmeetboththeRS-485andRS-422standardsforbalancedcommunication.Unlikecompetitivedevices,thisIntersilfamilyisspecifiedfor

ISL8489IB-T

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

5V,LowPower,HighSpeedorSlewRateLimited,RS-485/RS-422Transceivers TheIntersilRS-485/RS-422devicesareBiCMOS5Vpowered,singletransceiversthatmeetboththeRS-485andRS-422standardsforbalancedcommunication.Unlikecompetitivedevices,thisIntersilfamilyisspecifiedfor