5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers The Intersil RS-485/RS-422 devices are BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Intersil family is specified for

文件：507.83 Kbytes 页数：16 Pages

INTERSIL

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

文件：574.05 Kbytes 页数：16 Pages

INTERSIL

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

文件：913.02 Kbytes 页数：18 Pages

RENESAS

瑞萨

5V, Half Duplex, 5Mbps, RS-485/RS-422 Transceiver

The ISL8485, ISL8490, and ISL8491 RS-485 / RS-422 devices are BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this family is specified for 10% tolerance supplies (4. 5V to 5. 5V). The ISL8485, ISL8490, • Specified for 10% tolerance supplies\n• Class 3 ESD protection (HBM) on all pins: 7kV\n• High data rates: up to 5Mbps\n• Single unit load allows up to 32 devices on the bus\n• Low quiescent current: 500µA\n• -7V to +12V common-mode input voltage range\n• Three state Rx and Tx outputs (except I;

Renesas

瑞萨

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers The Intersil RS-485/RS-422 devices are BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Intersil family is specified for

文件：507.83 Kbytes 页数：16 Pages

INTERSIL

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers The Intersil RS-485/RS-422 devices are BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Intersil family is specified for

文件：507.83 Kbytes 页数：16 Pages

INTERSIL

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers The Intersil RS-485/RS-422 devices are BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Intersil family is specified for

文件：507.83 Kbytes 页数：16 Pages

INTERSIL

ESD Protected to 짹15kV, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

These Intersil RS-485, RS-422 devices are ESD protected, BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output/receiver input is protected against ±15kV ESD strikes, without latch-up. Unlike competitive devices, this In

文件：459.77 Kbytes 页数：14 Pages

INTERSIL

ESD Protected to 짹15kV, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

These Intersil RS-485, RS-422 devices are ESD protected, BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output/receiver input is protected against ±15kV ESD strikes, without latch-up. Unlike competitive devices, this In

文件：459.77 Kbytes 页数：14 Pages

INTERSIL

ESD Protected to 짹15kV, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

These Intersil RS-485, RS-422 devices are ESD protected, BiCMOS 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output/receiver input is protected against ±15kV ESD strikes, without latch-up. Unlike competitive devices, this In

文件：459.77 Kbytes 页数：14 Pages

INTERSIL