IP179N/NI/H/HI中文资料9 Port FE Ethernet Switch数据手册IC+规格书

描述 Description

The IP179N/H is a professional high-end SoC targeted for the Ethernet switch (w/ or w/o POE chips) or NVR application. This SoC is built in with an advanced switch engine, aiming to provide high-quality imagery output. Other built-in IPs, included a low power 9-port fast Ethernet transceivers, SSRAM, regulator, ESD protection and etc.
 The built-in transceivers, all comply with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. These transceivers were designed under DSP approach and produced with 85nm technology, hence the high noise immunity and robust performance. The switch controller of IP179N/H is designed to operate under store and forward mode.
 It supports up to 2K MAC addresses. These tables are accessible through MII register. The address table can configure either “2K unicast addresses” or “1K unicast addresses and 1K multicast addresses“. Rich control and management features supported, included IEEE 802.1Q, IGMP Snooping, QoS and etc.
 As an advanced Ethernet Switch controller, IP179N/H supports 2 operation modes to serve different application requirements precisely, Normal mode (Best quality for the down/up-load stream both) and IPC mode (Best efforts for the upload stream data).
 Besides this, considering the distance problem that could be generated while installing a far away (> 100meters) IP CAM to link with the Switch device. IP179N/H supports the LBAS function to handle/fix this situation.
 All of the functions that describe above, an external MAC/CPU can monitor or configure them by accessing MII registers through MDC/MDIO that IP179N/H supported.

特性 Features

• Family (Part Numbers)
• IP179N (88Pins QFN) 9 FE ports / 8 FE ports + 1 MAC w/ 1 RMII
• IP179H (128Pins LQFP) 8 FE ports + 1 Giga MAC

• Advanced Ethernet Switching Engine support 
2 operation modes
• Normal Mode (Default)
• IPC Mode

• MAC address up to 2K 

• Built-in 9 port PHYceivers 

• Each port can be configured to be 10Based-T, 
100Base-TX
• Support IEEE802.3az at 100M Full Duplex
• Support Auto MDI-MDIX
• Support up to 3 optional Fiber ports
• IEEE802.1Q VLAN
• Support 16 VLAN groups
• Support Port-based/tagged-based VLAN
• Support SVL/IVL
• Support Insert and Remove Tag 


• Class of Service
• Port-based, VLAN priority, IPv4 ToS, IPv6 DSCP 


• QoS
• Support 2-level priority queues per port WRR/SP

• Support Hardware IGMP v1/v2/v3 snooping
• Support STP, RSTP, and MSTP
• Support LBAS® (Length/Link Based Auto Switch)
• Broadcast Storm Protection
• Support Special Tag and QinQ header
• Support Port Trunking (Link Aggregation)
• Support Port Mirror 

• Power Management
• Support APS (Auto Power Saving Mode) while Link-off
• Support IEEE802.3az protocol based power saving

• IP179H supports 3.3/2.5/1.8V RGMII
• IP179HI supports 3.3/2.5V RGMII
• Support Statistics Counters
• Support Interrupt Pin 

• 85nm Process 

• Packaging and Operating Temperature
• IP179N 88-PIN QFN, 0°C to 70°C
• IP179NI 88-PIN QFN, -40°C to 85°C
• IP179H 128-PIN LQFP, 0°C to 70°C
• IP179HI 128-PIN LQFP, -40°C to 85°C