IP178C中文资料8-port 10/100M Ethernet Integrated Switch数据手册IC+规格书

描述 Description

IP178C integrated a 9-port switch controller, SSRAM, and 8 10/100 Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The transceivers are designed in DSP approach in 0.18um technology; they have high noise immunity and robust performance.

IP178C operates in store and forward mode. It supports flow control, auto MDI/MDI-X, CoS, port base VLAN, bandwidth control, DiffServ, SMART MAC and LED functions, etc. Each port can be configured as auto-negotiation or forced 10M/100M, full/half duplexmode. Using an EEPROM or pull up.down resistors on specific pins can configure the desired options.

Besides an 8-port switch application, IP178C supports one MII/RMII ports for router application, which supports 7 LAN ports and one WAN port. The external MAC can monitor or configure IP178C by accessing MII registers through SMI.

MII/RMII port also can be configured to be MAC mode. It is used to interface an external PHY to work as an8+1 switch.

特性 Features

Support 1k MAC address
Support auto-polarity for 10M
Support filter/forward special DA option
Support broadcast storm protection
Auto MDI-MDIX option
Support port security option to lock the first MAC address
Support one MII/RMII port, which works at 100M full duplex for router application
Support port base VLAN & tag VLAN
Support CoS
Support SMART MAC function
Support spanning tree protocol
Support max forwarding packet length 1552/1536 bytes option
Support SCA
Support two fiber ports with far end fault function for IP178CH only
Built in 3.3V/2.5V --> 1.8V regulator