BTF6070-2ERV BTF60702ERVXUMA1 电源开关IC 全新原装现货23+
Basic Features
• Dual channel device
• Fast switching device
• For 12 V and_24 V grounded load
• Very low stand-by current
• 3.3 V and_5 V compatible logic inputs
• Electrostatic discharge protection (ESD)
• Optimized electromagnetic compatibility
• Logic ground independent from load ground
• Very low power DMOS leakage current in OFF state
• Green product (RoHS compliant)
• AEC qualified
Description
The BTF6070-2ERV is a 60 mΩ dual channel Smart High-Side Power Switch, embedded in a PG-TDSO-14,
Exposed Pad package, providing protective functions and_diagnosis. The power transistor is built by a
N-channel vertical power MOSFET with charge pump. The device is integrated in Smart6 HV technology. It is
specially designed to drive Valve Applications in the harsh automotive environment. For lighting applications
the nominal bulb load of P10W+P5W 24 V or P10W 12 V is considered.
Diagnostic Functions
• Proportional load current sense for the 2 channels
• Open load detection in ON and_OFF
• Short circuit to battery and_ground indication
• Overtemperature switch off detection
• Stable diagnostic signal during short circuit
• Enhanced kILIS dependency with temperature and_load current
Protection Functions
• Stable behavior during undervoltage
• Reverse polarity protection with external components
• Secure load turn-off during logic ground disconnection with external components
Table 1 Product Summary
Parameter Symbol Value
Operating voltage range VS(OP) 5 V ... 36 V
Maximum supply voltage VS(LD) 65 V
Maximum ON state resistance at TJ = 150°C per channel RDS(ON) 135 mΩ
Nominal load current (one channel active) IL(NOM)1 3 A
Nominal load current (all channels active) IL(NOM)2 2.3 A
Typical current sense ratio kILIS 1730
Minimum current limitation I
L5(SC) 9 A
Maximum standby current with load at TJ = 25°C IS(OFF) 500 nA
PROFET™+ 24V
BTF6070-2ERV
Overview
• Overtemperature protection with latch
• Overvoltage protection with external components
• Enhanced short circuit operation
