品牌：AD
批号：17+
数量:10000
封装:LFCSP
价格:面议
说明：全新原装现货，可出样品
IC特征：FEATURES
Filterless Class-D amplifier with built-in output stage
2 W into 4 Ω and 1.4 W into 8 Ω at 5.0 V supply
Ultralow idle current with load resistance
>87% efficiency at 5.0 V, 1.4 W into 8 Ω speaker
Better than 96 dB SNR (signal-to-noise ratio)
Available in 16-lead, 3 mm × 3 mm LFCSP
Single-supply operation from 2.5 V to 5.0 V
20 nA ultralow shutdown current
Short-circuit and thermal protection
Pop-and-click suppression
Built-in resistors reduce board component count
Default fixed 18 dB gain and user-adjustable
APPLICATIONS
Mobile phones
MP3 players
Portable gaming
Portable electronics
Educational toys
Notebook computers
GENERAL DESCRIPTION
The SSM2306 is a fully integrated, high efficiency, Class-D stereo
audio amplifier designed to maximize performance for portable
applications. The application circuit requires minimum external
components and operates from a single 2.5 V to 5.0 V supply. It
is capable of delivering 2 W of continuous output power with less
than 10% THD + N driving a 4 Ω load from a 5.0 V supply.
The SSM2306 features ultralow idle current, high efficiency, and
a low noise modulation scheme. It operates with >87% efficiency
at 1.4 W into 8 Ω from a 5.0 V supply and has a signal-to-noise
ratio (SNR) that is better than 96 dB. PDM modulation offers lower
EMI radiated emissions compared to other Class-D architectures.
The SSM2306 has a micropower shutdown mode with a typical
shutdown current of 20 nA. Shutdown is enabled by applying a
logic low to the SD pin.
The architecture of the device allows it to achieve a very low level
of pop and click to minimize voltage glitches at the output
during turn-on and turn-off, thereby reducing audible noise on
activation and deactivation. The fully differential input of the
SSM2306 provides excellent rejection of common-mode noise
on the input. Input coupling capacitors can be omitted if the dc
input common-mode voltage is approximately VDD/2.
The SSM2306 also has excellent rejection of power supply noise,
including noise caused by GSM transmission bursts and RF
rectification.
The SSM2306 has a preset gain of 18 dB that can be reduced by
using external resistors.
The SSM2306 is specified over the commercial temperature range
(−40°C to +85°C). It has built-in thermal shutdown and output
short-circuit protection. It is available in a 16-lead, 3 mm × 3 mm
lead frame chip scale package (LFCSP).
联系人:程小姐
手机:15919480276
电话:0755- 21015360 & 23038182
传真:0755-23038182
地址:深圳市福田区振华路海外装饰大厦综合大楼2栋B段4楼4014B-33C
