INA30x 36-V, Overcurrent Protection, Precision, Current-Sense Amplifiers With Dual Integrated Comparators

1 Features 1• Wide common-mode input range: –0.1 V to +36 V • Dual comparator outputs: – INA302: Two independent overlimit alerts – INA303: Window comparator – Threshold levels set individually – Comparator 1 alert response: 1 μs – Comparator 2 adjustable delay: 2 μs to 10 s – Open-drain o

文件：1.044849 Mbytes 页数：42 Pages

TI

德州仪器

INA30x 36-V, Overcurrent Protection, Precision, Current-Sense Amplifiers With Dual Integrated Comparators

1 Features 1• Wide common-mode input range: –0.1 V to +36 V • Dual comparator outputs: – INA302: Two independent overlimit alerts – INA303: Window comparator – Threshold levels set individually – Comparator 1 alert response: 1 μs – Comparator 2 adjustable delay: 2 μs to 10 s – Open-drain o

文件：1.04556 Mbytes 页数：42 Pages

TI

德州仪器

Overcurrent Protection, High-Speed Precision, Current-Sense Amplifier

文件：153.27 Kbytes 页数：6 Pages

TI

德州仪器

Automotive, 36-V, Overcurrent Protection, Precision, Current-Sense Amplifiers With Dual Integrated Comparators

文件：865.68 Kbytes 页数：38 Pages

TI

德州仪器

具有双比较器的 36V、双向、550kHz、4V/µs 高精度电流感应放大器

INA302 和 INA303 (INA30x) 器件具有一个高共模、双向、电流检测放大器和两个高速比较器，用于检测超出范围的电流状况。INA302 比较器配置为检测和响应过流状况。INA303 比较器在窗口配置中配置为响应过流和欠流状况。这些器件使用外部限位设置电阻器，对每个比较器设置都具有可调限位阈值范围。这些电流分流监控器可在独立于电源的 –0.1V 至 36V 共模电压范围内测量差动电压信号。\n\n开漏极警报输出可配置为在透明模式（输出状态与输入状态保持一致）或锁存模式（警报输出在锁存复位时清除）下运行。比较器 1 的警报响应时间小于 1µs，而比较器 2 的警报响应时间通过外部电容 • 宽共模输入范围：–0.1V 至 +36V\n• INA302：两个独立的超限警报\n• 阈值电平单独设置\n• 比较器 2 可调延迟：2µs 至 10s\n• 高精度放大器： \n• 失调电压漂移：0.5µV/°C（最大值）\n• 增益误差漂移：10ppm/°C\n• 可用放大器增益： \n• INA302A2、INA303A2：50V/V\n• INA302A3、INA303A3：100V/V;

TI

德州仪器

INA30x 36-V, Overcurrent Protection, Precision, Current-Sense Amplifiers With Dual Integrated Comparators

1 Features 1• Wide common-mode input range: –0.1 V to +36 V • Dual comparator outputs: – INA302: Two independent overlimit alerts – INA303: Window comparator – Threshold levels set individually – Comparator 1 alert response: 1 μs – Comparator 2 adjustable delay: 2 μs to 10 s – Open-drain o

文件：1.04556 Mbytes 页数：42 Pages

TI

德州仪器

丝印：I302A1；Package：TSSOP；INA30x 36-V, Overcurrent Protection, Precision, Current-Sense Amplifiers With Dual Integrated Comparators

1 Features 1• Wide common-mode input range: –0.1 V to +36 V • Dual comparator outputs: – INA302: Two independent overlimit alerts – INA303: Window comparator – Threshold levels set individually – Comparator 1 alert response: 1 μs – Comparator 2 adjustable delay: 2 μs to 10 s – Open-drain o

文件：1.044849 Mbytes 页数：42 Pages

TI

德州仪器

丝印：I302A1；Package：TSSOP(PW)；INA30x 36-V, Overcurrent Protection, Precision, Current-Sense Amplifiers With Dual Integrated Comparators

1 Features 1• Wide common-mode input range: –0.1 V to +36 V • Dual comparator outputs: – INA302: Two independent overlimit alerts – INA303: Window comparator – Threshold levels set individually – Comparator 1 alert response: 1 μs – Comparator 2 adjustable delay: 2 μs to 10 s – Open-drain o

文件：1.04556 Mbytes 页数：42 Pages

TI

德州仪器

丝印：I302A1；Package：TSSOP(PW)；INA30x 36-V, Overcurrent Protection, Precision, Current-Sense Amplifiers With Dual Integrated Comparators

1 Features 1• Wide common-mode input range: –0.1 V to +36 V • Dual comparator outputs: – INA302: Two independent overlimit alerts – INA303: Window comparator – Threshold levels set individually – Comparator 1 alert response: 1 μs – Comparator 2 adjustable delay: 2 μs to 10 s – Open-drain o

文件：1.04556 Mbytes 页数：42 Pages

TI

德州仪器

丝印：I302A1；Package：TSSOP；INA30x 36-V, Overcurrent Protection, Precision, Current-Sense Amplifiers With Dual Integrated Comparators

1 Features 1• Wide common-mode input range: –0.1 V to +36 V • Dual comparator outputs: – INA302: Two independent overlimit alerts – INA303: Window comparator – Threshold levels set individually – Comparator 1 alert response: 1 μs – Comparator 2 adjustable delay: 2 μs to 10 s – Open-drain o

文件：1.044849 Mbytes 页数：42 Pages

TI

德州仪器