INA185 26-V, 350-kHz, Bidirectional, High-Precision Current Sense Amplifier in Ultra- Small (SOT-563) Package

1 Features • SC70 and SOT-563 packages – SC70 offers compatibility to existing solutions – SOT-563 is 39 smaller footprint than SC70 – SOT-563 dimensions is 1.6 mm × 1.6 mm × 0.55 mm • Common-mode range (VCM): –0.2 V to +26 V • High bandwidth: 350 kHz (A1 devices) • Offset voltage: – ±55

文件：1.60396 Mbytes 页数：35 Pages

TI

德州仪器

INA185-Q1 AEC-Q100, 26V, 350kHz, Bidirectional, High-Precision Current Sense Amplifier

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C ≤ TA ≤ 125°C – HBM ESD classification level 2 – CDM ESD classification level C6 • Functional Safety-Capable – Documentation available to aid functional safety system design • Common-mode range (VCM): –

文件：1.23757 Mbytes 页数：27 Pages

TI

德州仪器

Ultra-small, bidirectional, precision low-side and high-side, voltage output current-sense amplifier in SOT-563

文件：1.32975 Mbytes 页数：31 Pages

TI

德州仪器

采用超小型 (SOT-563) 封装的 26V、350kHz、双向高精度电流感应放大器

INA185 电流检测放大器专为成本敏感、空间受限的 应用而设计。此器件是一个双向电流检测放大器（也称为电流分流监控器），可在独立于电源电压的 –0.2V 至 +26V 范围内的共模电压中感测电流检测电阻器上的压降。INA185 以四个固定增益器件选项集成匹配电阻器增益网络：20V/V、50V/V、100V/V 或 200和V/V。该匹配增益电阻器网络可最大限度地减小增益误差并降低温度漂移。\n\nINA185 由 2.7V 至 5.5V 单电源供电。它消耗的最大电源电流为 260µA， 拥有 高压摆率和带宽，因此是许多电源和电机控制 解决方案的理想选择。\n\nINA185 采用 6 引脚 • SOT-563 封装 (1.6mm × 1.6mm) \n• 0.55mm 封装高度\n• 共模范围 (VCM)：–0.2V 至 +26V\n• 失调电压： \n• ±100µV（最大值），VCM = 12V（A4 器件）\n• 输出压摆率：2V/µs\n• 精度： \n• 最大温漂：0.5-µV/°C \n• 增益选项： \n• 50V/V（A2 器件）\n• 200V/V（A4 器件）\n• 瞬态电流：260µA（最大值）;

TI

德州仪器

INA185 26-V, 350-kHz, Bidirectional, High-Precision Current Sense Amplifier in Ultra- Small (SOT-563) Package

1 Features • SC70 and SOT-563 packages – SC70 offers compatibility to existing solutions – SOT-563 is 39% smaller footprint than SC70 – SOT-563 dimensions is 1.6 mm × 1.6 mm × 0.55 mm • Common-mode range (VCM): –0.2 V to +26 V • High bandwidth: 350 kHz (A1 devices) • Offset voltage: –

文件：1.60396 Mbytes 页数：35 Pages

TI

德州仪器

丝印：1PS；Package：SC70；INA185 26-V, 350-kHz, Bidirectional, High-Precision Current Sense Amplifier in Ultra- Small (SOT-563) Package

1 Features • SC70 and SOT-563 packages – SC70 offers compatibility to existing solutions – SOT-563 is 39 smaller footprint than SC70 – SOT-563 dimensions is 1.6 mm × 1.6 mm × 0.55 mm • Common-mode range (VCM): –0.2 V to +26 V • High bandwidth: 350 kHz (A1 devices) • Offset voltage: – ±55

文件：1.60396 Mbytes 页数：35 Pages

TI

德州仪器

丝印：1DV；Package：SOT-5X3；INA185 26-V, 350-kHz, Bidirectional, High-Precision Current Sense Amplifier in Ultra- Small (SOT-563) Package

1 Features • SC70 and SOT-563 packages – SC70 offers compatibility to existing solutions – SOT-563 is 39 smaller footprint than SC70 – SOT-563 dimensions is 1.6 mm × 1.6 mm × 0.55 mm • Common-mode range (VCM): –0.2 V to +26 V • High bandwidth: 350 kHz (A1 devices) • Offset voltage: – ±55

文件：1.60396 Mbytes 页数：35 Pages

TI

德州仪器

丝印：1DV；Package：SOT-5X3；INA185 26-V, 350-kHz, Bidirectional, High-Precision Current Sense Amplifier in Ultra- Small (SOT-563) Package

1 Features • SC70 and SOT-563 packages – SC70 offers compatibility to existing solutions – SOT-563 is 39 smaller footprint than SC70 – SOT-563 dimensions is 1.6 mm × 1.6 mm × 0.55 mm • Common-mode range (VCM): –0.2 V to +26 V • High bandwidth: 350 kHz (A1 devices) • Offset voltage: – ±55

文件：1.60396 Mbytes 页数：35 Pages

TI

德州仪器

丝印：1Q8；Package：SC70；INA185-Q1 AEC-Q100, 26V, 350kHz, Bidirectional, High-Precision Current Sense Amplifier

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C ≤ TA ≤ 125°C – HBM ESD classification level 2 – CDM ESD classification level C6 • Functional Safety-Capable – Documentation available to aid functional safety system design • Common-mode range (VCM): –

文件：1.14957 Mbytes 页数：25 Pages

TI

德州仪器

INA185-Q1 AEC-Q100, 26V, 350kHz, Bidirectional, High-Precision Current Sense Amplifier

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C ≤ TA ≤ 125°C – HBM ESD classification level 2 – CDM ESD classification level C6 • Functional Safety-Capable – Documentation available to aid functional safety system design • Common-mode range (VCM): –

文件：1.23757 Mbytes 页数：27 Pages

TI

德州仪器