POWER SUPPLY CONTROL WITH BUILT-IN WATCHDOG TIMER

POWER SUPPLY CONTROL WITH BUILT-IN WATCHDOG TIMER IN1232 is designed to monitor power supply within the system of reset signal generation for microprocessors. It is used in monitor systems for controlling various processes and entities. Packaged in 8-pin SOP or DIP. Features: • Rated supply vo

文件：258.04 Kbytes 页数：7 Pages

IKSEMICON

MICROMONITOR CHIP

DESCRIPTION The IN1232 MicroMonitor Chip monitors three vital conditions for a microprocessor: power supply, software execution, and external override. First, a precision temperature–compensated reference and comparator circuit monitors the status of VCC. When an out–of–tolerance condition occurs

文件：122.57 Kbytes 页数：6 Pages

INTEGRAL

Integral Corp.

Qudruple Line Receivers

The IN1489A is a monolithic quadruple line receivers designed to satisfy the requirements of the standard interface between data terminal equipment and data communication equipments as defined by EIA standard RS-232C. A separate response control terminal is provided for each receiver. A resistor o

文件：198.72 Kbytes 页数：3 Pages

INTEGRAL

Integral Corp.

Satisfies Requirements of EIA RS-232C

The IN1489A is a monolithic quadruple line receivers designed to satisfy the requirements of the standard interface between data terminal equipment and data communication equipments as defined by EIA standard RS-232C. A separate response control terminal is provided for each receiver. A resistor o

文件：173.09 Kbytes 页数：4 Pages

IKSEMICON

Qudruple Line Receivers

The IN1489A is a monolithic quadruple line receivers designed to satisfy the requirements of the standard interface between data terminal equipment and data communication equipments as defined by EIA standard RS-232C. A separate response control terminal is provided for each receiver. A resistor o

文件：198.72 Kbytes 页数：3 Pages

INTEGRAL

Integral Corp.

Qudruple Line Receivers

The IN1489A is a monolithic quadruple line receivers designed to satisfy the requirements of the standard interface between data terminal equipment and data communication equipments as defined by EIA standard RS-232C. A separate response control terminal is provided for each receiver. A resistor o

文件：198.72 Kbytes 页数：3 Pages

INTEGRAL

Integral Corp.

1.5 AMP GLASS PASSIVATED RECTIFIERS

FEATURES * Low forward voltage drop * High current capability * High reliability * High surge current capability * Glass passivated junction

文件：152.03 Kbytes 页数：2 Pages

BYTES

16-BIT RISC MICROCONTROLLER

Introduction The IN16C01 is a CMOS single-chip 16-bit microcontroller. The IN16C01 is a general purpose microcomputer and can be used in control systems, data acquisition systems and DSP systems. Low-power and fully static operation allow to use the microcontroller in self-contained systems with

文件：467.17 Kbytes 页数：8 Pages

INTEGRAL

Integral Corp.

Quard Uart with 256-Byte FIFO

Functional Description IN16C1054 is a quad UART(Universal Asynchronous Receiver/Transmitter) with 256-byte FIFO supporting maximum communication speed of 5.3Mbps. It offers flow control function by hardware or software and signal lines which can open or close the Tx/Rx input/output when communica

文件：634.01 Kbytes 页数：53 Pages

IKSEMICON

Quard Uart with 256-Byte FIFO

Functional Description IN16C1054 is a quad UART(Universal Asynchronous Receiver/Transmitter) with 256-byte FIFO supporting maximum communication speed of 5.3Mbps. It offers flow control function by hardware or software and signal lines which can open or close the Tx/Rx input/output when communica

文件：634.01 Kbytes 页数：53 Pages

IKSEMICON