丝印：1893AFLF；Package：SSOP；3.3-V 10Base-T/100Base-TX Integrated PHYceiver

Features • Single 3.3V power supply • Supports category 5 cables with attenuation in excess of 24dB at 100 MHz. • DSP-based baseline wander correction to virtually eliminate killer packets • Low-power, 0.35-micron CMOS (typically 400 mW) • Single-chip, fully integrated PHY provides PCS, PMA

文件：1.33776 Mbytes 页数：137 Pages

RENESAS

瑞萨

3.3-V 10Base-T/100Base-TX Integrated PHYceiver?

General The ICS1893AF is a lower cost, re-packaged version of the ICS1893Y-10. The ICS1893AF is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The ICS1893AF uses the same proven silicon as the ICS1

文件：1.04045 Mbytes 页数：136 Pages

IDT

丝印：1893AFLF；Package：SSOP；3.3-V 10Base-T/100Base-TX Integrated PHYceiver

Features • Single 3.3V power supply • Supports category 5 cables with attenuation in excess of 24dB at 100 MHz. • DSP-based baseline wander correction to virtually eliminate killer packets • Low-power, 0.35-micron CMOS (typically 400 mW) • Single-chip, fully integrated PHY provides PCS, PMA

文件：1.33776 Mbytes 页数：137 Pages

RENESAS

瑞萨

3.3 V 10Base-T/100Base-TX Integrated PHYceiver-TM

General The ICS1893AG is a re-packaged version of the ICS1893AF in a 56-lead TSSOP 240 mil package. The ICS1893AG is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The ICS1893AG uses the same prove

文件：1.37077 Mbytes 页数：135 Pages

ICST

3.3 V 10Base-T/100Base-TX Integrated PHYceiver-TM

General The ICS1893AG is a re-packaged version of the ICS1893AF in a 56-lead TSSOP 240 mil package. The ICS1893AG is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The ICS1893AG uses the same prove

文件：1.37077 Mbytes 页数：135 Pages

ICST

3.3 V 10Base-T/100Base-TX Integrated PHYceiver-TM

General The ICS1893AG is a re-packaged version of the ICS1893AF in a 56-lead TSSOP 240 mil package. The ICS1893AG is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The ICS1893AG uses the same prove

文件：1.37077 Mbytes 页数：135 Pages

ICST

3.3 V 10Base-T/100Base-TX Integrated PHYceiver-TM

General The ICS1893AG is a re-packaged version of the ICS1893AF in a 56-lead TSSOP 240 mil package. The ICS1893AG is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The ICS1893AG uses the same prove

文件：1.37077 Mbytes 页数：135 Pages

ICST

3.3-V 10Base-T/100Base-TX Integrated PHYceiver™

Features • Supports category 5 cables with attenuation in excess of 24dB at 100 MHz. • Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sub layers functions of IEEE standard. • 10Base-T and 100Base-TX IEEE 8802.3 compliant • Single 3.3V power supply • Highly configurabl

文件：1.43436 Mbytes 页数：133 Pages

RENESAS

瑞萨

3.3-V 10Base-T/100Base-TX Integrated PHYceiver?

General The ICS1893BF is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards, ISO/IEC 8802-3. The ICS1893BF is intended for MII, Node applications that require the Auto-MDIX feat

文件：1.44282 Mbytes 页数：138 Pages

IDT

3.3-V 10Base-T/100Base-TX Integrated PHYceiver

General The ICS1893BF is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards, ISO/IEC 8802-3. The ICS1893BF is intended for MII, Node applications that require the Auto-MDIX feat

文件：1.9813 Mbytes 页数：133 Pages

ICST