2035XD Step Motor Drive with Oscillator 2 Axis Full, Half and Microstep Programmable Digital Oscillator or Pulse Direction 2.0 amps, 35 VDC

Features • DC bus voltage 12-35 VDC motor supply (including ripple) • Software programmable motor current, 0.1–2.0 amps/phase • Software programmable step size, 200–50800 steps/rev • Automatic idle current reduction • Four optically isolated digital inputs: step/run 1, step/run 2, directi

文件：101.43 Kbytes 页数：2 Pages

AMP

3535 Step Motor Drive Full & Half Stepping 3.5 amps, 35 VDC

Features • DC bus voltage 12-35 VDC motor supply (including ripple) • Switch selectable motor current from 0.4–3.5 amps/phase • Switch selectable full or half step • Automatic 50 idle current reduction • Optically isolated 5 VDC inputs for step, direction and enable • Enable input to turn

文件：53.93 Kbytes 页数：2 Pages

AMP

3535 O Step Motor Drive with Oscillator Full & Half Step 3.5 amps, 35 VDC

Features • DC bus voltage 12-35 VDC motor supply (including ripple) • Switch selectable motor current from 0.4–3.5 amps/phase • Switch selectable full or half step • Automatic 50 idle current reduction • Optically isolated 5 VDC inputs, step, direction and enable • Enable input to turn of

文件：57.56 Kbytes 页数：2 Pages

AMP

Si 2035 Programmable Stepper Drive

Description The Si2035 is a programmable stepper drive/ indexer packaged in a rugged steel case . Integral heat sink, mounting brackets, switch covers and connectors are included with each Si2035. The drive/indexer has been matched with nine recommended NEMA 11, 14, 17 and 23 motors and com

文件：589.52 Kbytes 页数：8 Pages

AMP

1035D Dual Step Drive Full & Half Stepping 1.0 amps, 35 VDC

Features • Accepts 12 – 35 VDC power supply (including ripple) • Adjustable motor current: 0 to 1.0 amps/phase. • Full or half step (jumper selectable), quarter stepping available for OEM • Compact size (1.0 x 2.4 x 3.55 inches) • Mounts on DIN rail • Optically isolated 5 – 24V step and di

文件：55.01 Kbytes 页数：2 Pages

AMP

1A General Purpose LDO

General Description The HT1117 devices are a series of three-terminal high current low voltage regulators. They can deliver an out put current of 1A and can accept input voltages up to 12V. The devices are available in both adjustable and fixed output voltage type with a range of 1.8V to

文件：105.46 Kbytes 页数：10 Pages

HOLTEK

合泰

1A General Purpose LDO

General Description The HT1117 devices are a series of three-terminal high current low voltage regulators. They can deliver an out put current of 1A and can accept input voltages up to 12V. The devices are available in both adjustable and fixed output voltage type with a range of 1.8V to

文件：105.46 Kbytes 页数：10 Pages

HOLTEK

合泰

1A General Purpose LDO

General Description The HT1117 devices are a series of three-terminal high current low voltage regulators. They can deliver an out put current of 1A and can accept input voltages up to 12V. The devices are available in both adjustable and fixed output voltage type with a range of 1.8V to

文件：105.46 Kbytes 页数：10 Pages

HOLTEK

合泰

1A General Purpose LDO

General Description The HT1117 devices are a series of three-terminal high current low voltage regulators. They can deliver an out put current of 1A and can accept input voltages up to 12V. The devices are available in both adjustable and fixed output voltage type with a range of 1.8V to

文件：105.46 Kbytes 页数：10 Pages

HOLTEK

合泰

1A General Purpose LDO

General Description The HT1117 devices are a series of three-terminal high current low voltage regulators. They can deliver an out put current of 1A and can accept input voltages up to 12V. The devices are available in both adjustable and fixed output voltage type with a range of 1.8V to

文件：105.46 Kbytes 页数：10 Pages

HOLTEK

合泰