Single, Double or Triple-Output Hot Plug Controller

The HIP1020 applies a linear voltage ramp to the gates of any combination of 3.3V, 5V, and 12V MOSFETs. The internal charge pump doubles a 12V bias or triples a 5V bias to deliver the high-side drive capability required when using more cost-effective N-Channel MOSFETs. The 5V/ms ramp rate is contr

文件：51 Kbytes 页数：6 Pages

Intersil

Single, Double or Triple-Output Hot Plug Controller

The HIP1020 applies a linear voltage ramp to the gates of any combination of 3.3V, 5V, and 12V MOSFETs. The internal charge pump doubles a 12V bias or triples a 5V bias to deliver the high-side drive capability required when using more cost-effective N-Channel MOSFETs. The 5V/ms ramp rate is contr

文件：372.67 Kbytes 页数：6 Pages

RENESAS

瑞萨

Single, Double or Triple-Output Hot Plug Controller

The HIP1020 applies a linear voltage ramp to the gates of any combination of 3.3V, 5V, and 12V MOSFETs. The internal charge pump doubles a 12V bias or triples a 5V bias to deliver the high-side drive capability required when using more cost-effective N-Channel MOSFETs. The 5V/ms ramp rate is contr

文件：372.67 Kbytes 页数：6 Pages

RENESAS

瑞萨

1A High Side Driver with Overload Protection

Description The HIP1030 is a High Side Driver Power Integrated Circuit designed to switch power supply voltage to an output load. It is the equivalent of a PNP pass transistor operated as a protected high side current switch in the saturated ON state with low forward voltage drop at the maximum r

文件：36.58 Kbytes 页数：5 Pages

Intersil

1A High Side Driver with Overload Protection

Description The HIP1030 is a High Side Driver Power Integrated Circuit designed to switch power supply voltage to an output load. It is the equivalent of a PNP pass transistor operated as a protected high side current switch in the saturated ON state with low forward voltage drop at the maximum r

文件：36.58 Kbytes 页数：5 Pages

Intersil

Half Amp High Side Driver with Overload Protection

Description The HIP1031 is a High Side Driver Power Integrated Circuit designed to switch power supply voltage to an output load. It is the equivalent of a PNP pass transistor operated as a protected high side current switch in the saturated ON state with low forward voltage drop at the maximum r

文件：29.49 Kbytes 页数：4 Pages

Intersil

Half Amp High Side Driver with Overload Protection

Description The HIP1031 is a High Side Driver Power Integrated Circuit designed to switch power supply voltage to an output load. It is the equivalent of a PNP pass transistor operated as a protected high side current switch in the saturated ON state with low forward voltage drop at the maximum r

文件：29.49 Kbytes 页数：4 Pages

Intersil

Protected High Side Power Switch with Transient Suppression

Description The HIP1090 is a Protected Power Interface Switch designed to suppress potentially damaging over-voltage transients with peak voltage source inputs ranging up to ±90V in amplitude. I Features • ±90V Transient Suppression • 4V to 16V Operating Voltage • 1A Current Load Capability

文件：34.26 Kbytes 页数：5 Pages

Intersil

Protected High Side Power Switch with Transient Suppression

Description The HIP1090 is a Protected Power Interface Switch designed to suppress potentially damaging over-voltage transients with peak voltage source inputs ranging up to ±90V in amplitude. I Features • ±90V Transient Suppression • 4V to 16V Operating Voltage • 1A Current Load Capability

文件：34.26 Kbytes 页数：5 Pages

Intersil

60V, 10A Half Bridge Power MOSFET Array

Description The HIP2060 is a power half-bridge MOSFET array that consists of two matched N-Channel enhancement-mode MOS transistors. The advanced Intersil PASIC2 process technology used in this product utilizes efficient geometries that provides outstanding device performance and ruggedness. Fea

文件：59.09 Kbytes 页数：8 Pages

Intersil