Power Distribution Controllers

Features • HOT SWAP Single Power Distribution Control (HIP1015 for 12V, HIP1016 for 5V and Low Side Switch) • Undervoltage Monitoring and Notification • Overcurrent Fault Isolation • Programmable Current Regulation Level • Programmable Current Limit Time to Latch-Off • Rail to Rail Common M

文件：586.9 Kbytes 页数：9 Pages

RENESAS

瑞萨

Power Distribution Controllers

Features • HOT SWAP Single Power Distribution Control (HIP1015 for 12V, HIP1016 for 5V and Low Side Switch) • Undervoltage Monitoring and Notification • Overcurrent Fault Isolation • Programmable Current Regulation Level • Programmable Current Limit Time to Latch-Off • Rail to Rail Common M

文件：586.9 Kbytes 页数：9 Pages

RENESAS

瑞萨

Power Distribution Controllers

The HIP1015 and HIP1016 are hot swap power controllers. The HIP1015 is targeted for a +12V bus whereas the HIP1016 is targeted for +5V applications. Each has an undervoltage (UV) monitoring and reporting with a threshold level ~17 lower than the nominal +12V and +5V. Features • HOT SWAP Single P

文件：200.29 Kbytes 页数：10 Pages

Intersil

Power Distribution Controllers

The HIP1015 and HIP1016 are hot swap power controllers. The HIP1015 is targeted for a +12V bus whereas the HIP1016 is targeted for +5V applications. Each has an undervoltage (UV) monitoring and reporting with a threshold level ~17 lower than the nominal +12V and +5V. Features • HOT SWAP Single P

文件：200.29 Kbytes 页数：10 Pages

Intersil

Power Distribution Controllers

The HIP1015 and HIP1016 are hot swap power controllers. The HIP1015 is targeted for a +12V bus whereas the HIP1016 is targeted for +5V applications. Each has an undervoltage (UV) monitoring and reporting with a threshold level ~17 lower than the nominal +12V and +5V. Features • HOT SWAP Single P

文件：200.29 Kbytes 页数：10 Pages

Intersil

Power Distribution Controllers

Features • HOT SWAP Single Power Distribution Control (HIP1015 for 12V, HIP1016 for 5V and Low Side Switch) • Undervoltage Monitoring and Notification • Overcurrent Fault Isolation • Programmable Current Regulation Level • Programmable Current Limit Time to Latch-Off • Rail to Rail Common M

文件：586.9 Kbytes 页数：9 Pages

RENESAS

瑞萨

Power Distribution Controllers

Features • HOT SWAP Single Power Distribution Control (HIP1015 for 12V, HIP1016 for 5V and Low Side Switch) • Undervoltage Monitoring and Notification • Overcurrent Fault Isolation • Programmable Current Regulation Level • Programmable Current Limit Time to Latch-Off • Rail to Rail Common M

文件：586.9 Kbytes 页数：9 Pages

RENESAS

瑞萨

Power Distribution Controllers

The HIP1015 and HIP1016 are hot swap power controllers. The HIP1015 is targeted for a +12V bus whereas the HIP1016 is targeted for +5V applications. Each has an undervoltage (UV) monitoring and reporting with a threshold level ~17 lower than the nominal +12V and +5V. Features • HOT SWAP Single P

文件：200.29 Kbytes 页数：10 Pages

Intersil

Single, Double or Triple-Output Hot Plug Controller

The HIP1020 applies a linear voltage ramp to the gates of any combination of 3.3V, 5V, and 12V MOSFETs. The internal charge pump doubles a 12V bias or triples a 5V bias to deliver the high-side drive capability required when using more cost-effective N-Channel MOSFETs. The 5V/ms ramp rate is contr

文件：51 Kbytes 页数：6 Pages

Intersil

Single, Double or Triple-Output Hot Plug Controller

The HIP1020 applies a linear voltage ramp to the gates of any combination of 3.3V, 5V, and 12V MOSFETs. The internal charge pump doubles a 12V bias or triples a 5V bias to deliver the high-side drive capability required when using more cost-effective N-Channel MOSFETs. The 5V/ms ramp rate is contr

文件：372.67 Kbytes 页数：6 Pages

RENESAS

瑞萨