Hex inverter

DESCRIPTION The HEF4069UB is a general purpose hex inverter. Each of the six inverters is a single stage.

文件：116.07 Kbytes 页数：7 Pages

PHI

PHI

Hex unbuffered inverter

1. General description The HEF4069UB is a hex unbuffered inverter. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. 2. Features and benefits • Wide supply voltage range from 3.0 V to 15.0 V • CMOS low power dissi

文件：246.18 Kbytes 页数：13 Pages

NEXPERIA

安世

Hex inverter Rev. 8 ??16 November 2011

文件：128.02 Kbytes 页数：17 Pages

恩XP

Hex unbuffered inverter

1. General description The HEF4069UB-Q100 is a hex unbuffered inverter. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (G

文件：247.13 Kbytes 页数：13 Pages

NEXPERIA

安世

Hex unbuffered inverter

1. General description The HEF4069UB is a hex unbuffered inverter. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. 2. Features and benefits • Wide supply voltage range from 3.0 V to 15.0 V • CMOS low power dissi

文件：246.18 Kbytes 页数：13 Pages

NEXPERIA

安世

Hex unbuffered inverter

1. General description The HEF4069UB-Q100 is a hex unbuffered inverter. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VDD. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (G

文件：247.13 Kbytes 页数：13 Pages

NEXPERIA

安世

Hex inverter Rev. 8 ??16 November 2011

文件：128.02 Kbytes 页数：17 Pages

恩XP

Hex inverter Rev. 8 ??16 November 2011

文件：128.02 Kbytes 页数：17 Pages

恩XP

Hex inverter

文件：741.59 Kbytes 页数：16 Pages

NEXPERIA

安世

Hex inverter

The HEF4069UB is a general purpose hex inverter. Each inverter has a single stage.\n It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS(usually ground). Unused inputs must be connected to VDD, VSS, or another input. • Fully static operation\n• 5 V, 10 V, and 15 V parametric ratings\n• Standardized symmetrical output characteristics\n• Specified from ‑40 °C to +85 °C and ‑40 °C to +125 °C\n• Complies with JEDEC standard JESD 13-B;

Nexperia

安世