HEF4066BT

Quadruple bilateral switches

DESCRIPTION TheHEF4066Bhasfourindependentbilateralanalogueswitches(transmissiongates).Eachswitchhastwoinput/outputterminals(Y/Z)andanactiveHIGHenableinput(E).WhenEisconnectedtoVDDalowimpedancebidirectionalpathbetweenYandZisestablished(ONcondition).WhenE

ETC

HEF4066BT

Quad single-pole single-throw analog switch

Generaldescription TheHEF4066Bprovidesfoursingle-pole,single-throwanalogswitchfunctions.Eachswitchhastwoinput/outputterminals(nYandnZ)andanactiveHIGHenableinput(nE).WhennEisLOW,theanalogswitchisturnedoff.TheHEF4066BispincompatiblewiththeHEF4016Bbutex

ETC

HEF4066BT

Quad single-pole single-throw analog switch

1.Generaldescription TheHEF4066Bisaquadsinglepole,singlethrowanalogswitch.Eachswitchfeaturestwo input/outputterminals(nYandnZ)andanactiveHIGHenableinput(nE).WhennEisLOW,the analogswitchisturnedoff.Inputsincludeclampdiodes.Thisenablestheuseofcurrent

HEF4066BT

Quad single-pole single-throw analog switch; • Fully static operation\n• 5 V, 10 V, and 15 V parametric ratings\n• Standardized symmetrical output characteristics\n• Inputs and outputs are protected against electrostatic effects\n• Specified from ‑40 °C to +85 °C and ‑40 °C to +125 °C\n• Complies with JEDEC standard JESD 13-B\n;

The HEF4066B provides four single-pole, single-throw analog switch functions. Each switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off.\n The HEF4066B is pin compatible with the HEF4016B but exhibits a much lower ON resistance. In addition the ON resistance is relatively constant over the full input signal range.\n

HEF4066BT-Q100

Quad single-pole single-throw analog switch; • Automotive product qualification in accordance with AEC-Q100 (Grade 1)• Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n• Fully static operation\n• 5 V, 10 V, and 15 V parametric ratings\n• Standardized symmetrical output characteristics\n• ESD protection:• MIL-STD-833, method 3015 exceeds 2000 V\n• HBM JESD22-A114F exceeds 2000 V\n• MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)\n\n• Inputs and outputs are protected against electrostatic effects\n• Complies with JEDEC standard JESD 13-B\n;

The HEF4066B-Q100 provides four single-pole, single-throw analog switch functions. Each switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off.\n This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.\n

HEF4066BT-Q100

NXP Logic ??Q100 logic portfolio

ETC