Quadruple bilateral switches

DESCRIPTION The HEF4066B has four independent bilateral analogue switches (transmission gates). Each switch has two input/output terminals (Y/Z) and an active HIGH enable input (E). When E is connected to VDD a low impedance bidirectional path between Y and Z is established (ON condition). When E

文件：88.16 Kbytes 页数：8 Pages

PHI

飞利浦

Quad single-pole single-throw analog switch

文件：150.26 Kbytes 页数：16 Pages

PHI

飞利浦

Quad single-pole single-throw analog switch

文件：797.26 Kbytes 页数：15 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

NXP Logic ??Q100 logic portfolio

文件：1.88964 Mbytes 页数：2 Pages

恩XP

Quad single-pole single-throw analog switch

General description\nThe HEF4066B provides four single-pole, single-throw analog switch functions. Each switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. The HEF4066B is pin compatible with the HEF4016B but exhibi

恩XP

恩智浦

Quad single-pole single-throw analog switch

The HEF4066B provides four single-pole, single-throw analog switch functions. Each switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off.\n The HEF4066B is pin compatible with the HEF4016B but exhibits a much lower • Fully static operation\n• 5 V, 10 V, and 15 V parametric ratings\n• Standardized symmetrical output characteristics\n• Inputs and outputs are protected against electrostatic effects\n• Specified from ‑40 °C to +85 °C and ‑40 °C to +125 °C\n• Complies with JEDEC standard JESD 13-B;

Nexperia

安世

Quad single-pole single-throw analog switch

The HEF4066B-Q100 provides four single-pole, single-throw analog switch functions. Each switch has two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off.\n This product has been qualified to the Automotive Electronics Council • Automotive product qualification in accordance with AEC-Q100 (Grade 1)• Specified from -40 °C to +85 °C and from -40 °C to +125 °C\n\n• Fully static operation\n• 5 V, 10 V, and 15 V parametric ratings\n• Standardized symmetrical output characteristics\n• ESD protection:• MIL-STD-833, method 3015 e;

Nexperia

安世