Dual Differential Line Drivers / ReceiversWith 3 State Outputs

The HD29050 features differential line drivers / receivers with three state output designed to meet the spec of EIA RS – 422A and 423A. Each device has two drivers / receivers in a 16 pin package. The device becomes in enable state when active high for a driver and active low for a receiver.

文件：45.93 Kbytes 页数：10 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

Dual Differential Line Drivers/ReceiversWith 3 State Outputs

Description The HD29050 features differential line drivers/receivers with three state output designed to meet the spec of EIA RS-422A and 423A. Each device has two drivers/receivers in a 16 pin package. The device becomes in enable state when active high for a driver and active low for a rec

文件：163.79 Kbytes 页数：14 Pages

RENESAS

瑞萨

Dual Differential Line Drivers/ReceiversWith 3 State Outputs

Description\nThe HD29050 features differential line drivers/receivers with three state output designed to meet the of EIA RS-422A and 423A. Each device has two drivers/receivers in a 16 pin package. The device becomes in enable state when active high for a driver and active low for a receiver. Driver\n•  Built in current restriction when short circuit\n•  Power up/down protection.\n•  High output current IOH= –40 mA \n                              IOL= 40 mA\nReceiver\n•  Input hysteresis (Typ. 50 mV)\n•  In phase input voltage ±200 mV of input sensitivity in the range –7 to +12 V.;

HITACHI

日立

ASSP>ICs for Interface

Renesas

瑞萨

Dual Differential Line Drivers/ReceiversWith 3 State Outputs

Description The HD29050 features differential line drivers/receivers with three state output designed to meet the spec of EIA RS-422A and 423A. Each device has two drivers/receivers in a 16 pin package. The device becomes in enable state when active high for a driver and active low for a rec

文件：163.79 Kbytes 页数：14 Pages

RENESAS

瑞萨

Analog & Mixed signal

Renesas

瑞萨