Programmable Hall Switch

Introduction The Hall programmer board V 5.1 is a general-purpose programming interface which is capable of addressing the programmable Micronas Hall-effect sensor families HAL 8xy and HAL 100x. The Hall programmer board V 5.1 is fully software compatible to the Hall programmer board V 4.1. Henc

文件：813.71 Kbytes 页数：28 Pages

MICRONAS

Programmable Hall Switch

Introduction The Hall programmer board V 5.1 is a general-purpose programming interface which is capable of addressing the programmable Micronas Hall-effect sensor families HAL 8xy and HAL 100x. The Hall programmer board V 5.1 is fully software compatible to the Hall programmer board V 4.1. Henc

文件：813.71 Kbytes 页数：28 Pages

MICRONAS

Programmable Hall Switch

Introduction The HAL 1000 is a programmable Hall switch. The major sensor characteristics, the two switching points BON and BOFF, are programmable for the application. The sensor can be programmed to be unipolar or latching, sensitive to the magnetic north pole or sensitive to the south pole, with

文件：1.63073 Mbytes 页数：30 Pages

MICRONAS

Programmable Hall Switch

Introduction The HAL 1000 is a programmable Hall switch. The major sensor characteristics, the two switching points BON and BOFF, are programmable for the application. The sensor can be programmed to be unipolar or latching, sensitive to the magnetic north pole or sensitive to the south pole, with

文件：1.63073 Mbytes 页数：30 Pages

MICRONAS

Programmable Hall Switch

Introduction The Hall programmer board V 5.1 is a general-purpose programming interface which is capable of addressing the programmable Micronas Hall-effect sensor families HAL 8xy and HAL 100x. The Hall programmer board V 5.1 is fully software compatible to the Hall programmer board V 4.1. Henc

文件：813.71 Kbytes 页数：28 Pages

MICRONAS

Highly Precise Programmable Hall-Effect Switch

Introduction The Hall programmer board V 5.1 is a general-purpose programming interface which is capable of addressing the programmable Micronas Hall-effect sensor families HAL 8xy and HAL 100x. The Hall programmer board V 5.1 is fully software compatible to the Hall programmer board V 4.1. Henc

文件：400.62 Kbytes 页数：29 Pages

MICRONAS

Current Transducer HAL 50~600-S

Current Transducer HAL 50..600-S For the electronic measurement of DC, AC and pulsed currents, with a galvanic isolation between the primary (high power) circuit and the secondary (electronic) circuit. Features ·Open loop transducer using Hall Effect ·Panel mounting - Horizontal

文件：57.23 Kbytes 页数：2 Pages

LEM

莱姆

Current Transducer

Current Transducer HAL 50..600-S For the electronic measurement of DC, AC and pulsed currents, with a galvanic isolation between the primary (high power) circuit and the secondary (electronic) circuit. Features ·Open loop transducer using Hall Effect ·Panel mounting - Horizontal

文件：40.04 Kbytes 页数：2 Pages

LEM

莱姆

Programmer Board

文件：752.73 Kbytes 页数：102 Pages

MICRONAS

Programmer Board

文件：752.73 Kbytes 页数：102 Pages

MICRONAS